Question about Indesit W 123 Front Load Washer

4 Answers

Indesit Standard WIL 123 (UK) Washing Machine

Hi ,
For some reason the timer delay (green) led and the door lock (red) led are flashing rapidly. I can get the machine to fill with water.and empty. and i can get the machine to spin for about 15 seconds. after that the machine stops and the leds flash rapidly. I;ve cleaned the pump chamber out. Please help

Posted by on

  • Anonymous Jan 07, 2008

    Hello,
    I have this problem too. It just happened at the weekend. No idea how to fix it, so I had to call indesit to send out a service engineer. The standard cost is 114 euro. I live in Ireland and the machine is out of date.

  • shegrel Nov 03, 2008

    i hve the same problem with flashing red door light and stain remover and extra rinse flashing any ideas

×

Ad

4 Answers

Sounds like module prob,EMW fixed mine for £40 tel01159652118. BOB

Posted on Mar 17, 2008

Ad

Hi Guest

"Had a similar problem ,flashing red led means door not locked, I removed door from machine removed front from door and found hinge pin for lock had come adrift, religned pin and chapped back into position .THen replaced door and door to machine .dor shut and lock worked perfectly, hope this helps" How did you remove front from door?

Posted on Jan 11, 2008

Ad

Hi

I have the exact same problem as described above. Am living in Dublin , anybody know who could fix this for me?

Posted on Jan 11, 2008

Had a similar problem ,flashing red led means door not locked, I removed door from machine removed front from door and found hinge pin for lock had come adrift, religned pin and chapped back into position .THen replaced door and door to machine .dor shut and lock worked perfectly, hope this helps

Posted on Jan 11, 2008

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit washer/dryer widl 126s


Hi gmarf....to reset your machine to cancel those symptoms, Unplug your machine from the Wall Outlet for a minimum of 1 minute. Upon restoring power, it should be reset and ready-to-go.....If you have any further questions or issues please update your post....good luck my friend

Aug 12, 2007 | Indesit W 123 Front Load Washer

1 Answer

Lights flashing on indesit WIL123S


Hi, sounds like you need to change the door interlock located where the door catch pushes into.
Take the top off and undo the two screws with a tork screwdriver
and replace.
(Remember to turn off the supply and pull out the plug top)

May 09, 2009 | Indesit W 123 Front Load Washer

1 Answer

Indesit WIDL 106 wont start -ON/OFF-Door Led Flashes rapidly


It is a defectiv controller pcb. I think the eeprom on the controller pcb lost its program (happens often on Indesit machines).

The only solution I know is to change the controller pcb, - not a cheap solution.
I have the same problem with WIDL 106.

Dec 01, 2008 | Indesit W 123 Front Load Washer

2 Answers

Washing machine fault


Usually indicates door is not closed properly.
If it is shut securely, and still does not work, then you could have a faulty door lock.
Another possibility is the control unit could be faulty.

Nov 29, 2008 | Indesit W 123 Front Load Washer

1 Answer

INDESIT 1000 DOES NOT START


Had a similar problem ,flashing red led means door not locked, I removed door from machine removed front from door and found hinge pin for lock had come adrift, religned pin and chapped back into position .THen replaced door and door to machine .dor shut and lock worked perfectly, hope this helps
If this doesn't work you may have to replace the EMW. Should cost you around 60$

May 23, 2008 | Indesit W 123 Front Load Washer

2 Answers

Indesit WIL103 flashing lights problem


because of the short time this runs then stops, there could be maybe 3 faults, 1 check water inlet valves and supply for water flow 2 check for any motor action (use another programme) 3 check heater element for open circuit number 1 or number 3 sounds most likely hope i have helped, if so rate me please

Sep 25, 2007 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

2,055 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

jimorris77

Level 3 Expert

411 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...