How do you print small envelopes on this printer? When I try to print envelopes that measure less...
(More)
How do you print small envelopes on this printer? When I try to print envelopes that measure less than 1000 X 1400 (.01cm), the machine will not grab the envelope and print it. It seems to work on envelopes larger than that size.
will not print, replaced ink and it now says black ink is out and will not print. Reset and it still...
(More)
will not print, replaced ink and it now says black ink is out and will not print. Reset and it still says black ink and will not print -- HELP Epson CX6600
Epson In May 2009 I purchased an Epson NX 300 from Milwaukee PC. Address:11633 West North Avenue,...
(More)
Epson In May 2009 I purchased an Epson NX 300 from Milwaukee PC. Address:11633 West North Avenue, Wauwatosa WI.; milwpc.com. It worked fine until a week ago when I loaded Mac OS X snow Leopard 10.6 on my computer. I did correlate the new OS to my Epson failure. So I took the printer back to MilwaukeePC and told them to fix it as it was still under warrantee. I asked if I should leave it for them to work on or should I wait. They told me it would not be long and I could wait. 2 1/2 hours later they told me they could not fix it and gave the Epson number of 1-562-276-4382 for service. When looking around I found the Epson driver I have does not support Sno Leopard, apparently there isa driver that will support Mac OS Sno Leopard. How do I get that driver and do you think it will cure my problem? When I called (long distance at my cost) I was told to go to your web site for service. After sending a message two times and each failed, I am now sending it again. Please help! I did print your 'how do i replace an ink cartridge. it says i should press setup I can not find a Setup to press. please tell me how to find 'setup. thanks Thanks My e-mail address is: e.gillman@milwpc.com. Phone: 262-786-1148.
I have an epson stylus CX6600....a long strip of perforated foam rubber has torn up in printing...do...
(More)
I have an epson stylus CX6600....a long strip of perforated foam rubber has torn up in printing...do I need to replace it ? If so where do i pick up one?