I have a HP psc 2110xi all in one printer, scanner, copier and I loaded my cartridges in and the...
(More)
I have a HP psc 2110xi all in one printer, scanner, copier and I loaded my cartridges in and the machine asked to do an alignment when prompted. I did so and the machine keeps saying alignment in progress but it never stops. I tried hitting the start scan button and the machine says " busy " what can I do?
Start 2110, itcomtinuously recycles with a racheting noise, will npt take a project, will not print,...
(More)
Start 2110, itcomtinuously recycles with a racheting noise, will npt take a project, will not print, scan etc
on borderless photo printing leaves 3/8 inch border at trailing edge of paper on 4 x 6 prints. on 8...
(More)
on borderless photo printing leaves 3/8 inch border at trailing edge of paper on 4 x 6 prints. on 8 1/2 x 11 leaves 1/4 inch on each side and 1/2 inch at trailing edge.
The printer function is working fine, but when I press "start scan" (which used to trigger...
(More)
The printer function is working fine, but when I press "start scan" (which used to trigger the scanner software to open up on my computer), I immediately get this error message: "An error occurred communicating with the scanning device. Please ensure that the scanning device is connected properly and try again." Since I am able to print, I know there isn't really a problem with the connection. I tried installing the software from the disk, but that didn't work (maybe I somehow screwed that up?) Any help would be greatly appreciated!