Question about Grundig GF70-600 TV
A friend gave us a GRUNDIG tv, unfortunately the remote control is lost. It as a security coded written on it, so we cant switch it on. We tried using our universal remote, but that didnt work either. what do we do?
The Television may be faulty, but without reading the manual I can't say for sure. If you want to risk spend some money to find out, here is a link to a website selling the remote control you require for the GF70-600 TV. I've not had any dealings with the company but you could always contact them to check your buying an original (OEM*) Grundig remote before you buy one.
*OEM means, Original Equipment Manufacturer.
Hope this is helpful.
Spare head 2.
Posted on Jan 04, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 22, 2012 | Televison & Video
563 582 515 098 584 219 104 233 223 065 471
Sky+ Remote Control Unit Programming Procedure Follow the steps below
1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 3 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.
If this works try the other TV functions.
If these work then the correct code has been selected.
It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.
If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.
Aug 20, 2011 | Televison & Video
514 398 065
Four digit code is:
1* Turn your TV and SkyHD box on and press tv on your remote control.
2* Hold down select and the red button together until the red light on your remote
control blinks twice (this is after about two seconds).
3* Press tv again.
4* Key in your TV's brand code. The light on your remote control blinks twice.
5* Press standby on your remote control.
If your TV switches off, press select.
The light on your remote control should blink twice.
If your TV does not switch off, press tv, then press standby.
Repeat the sequence of pressing tv then standby until the TV switches off,
then press select.
If the light blinks three times, your remote control has checked all the possible
settings for the code you used. Check you have the right code and start again
at step 1.
*6 Turn your TV back on and press the tv guide button on your remote control.
The TV Guide screen appears, meaning the remote control settings have
Aug 12, 2011 | Televison & Video
May 19, 2009 | Universal Remote Control Televison & Video
Feb 22, 2009 | One For All URC-3021 Remote Control
Jul 15, 2008 | Televison & Video
Jun 13, 2008 | Grundig GF70-600 TV
Jan 14, 2008 | Hitachi CLU-4324UG Remote Control
Dec 27, 2007 | Grundig GF70-600 TV
557 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: