Question about Dell E153FP 15" LCD Monitor

1 Answer

Dead dell flat screen lcd model E151FPb

I have recently been given one of these and all it does when you apply power to it is emmit a real low chirping noise. been looking around for information and all i found was to check cold solder joints. the board looks fine. nothing looks burned. also found out by replacing Q604 which is 2N7000 and says can be replaced with 2N2222 with 10k resistor which i didnt quite get where to place it if its true. any info would be appreciated..
please email me at ohio_man_26@yahoo.com with whatever info.

thank you

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

First find out why you need to change this transistor, if it is shorted or open then replace it , but be carefull when you substitute parts which could create havoc, to check the spec's of these to components look up the 2n7000 note the specs and see how close the 2n2222 relates to , my recommendation is to get the original.

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I upload a solution? I want to tell people how to disassemble the Dell E151FPB LCD monitor.


You will need to sighn up for FixYa, seeing that you've listed this question I'm guessing you've already done that. Then you can create tips, once you have created a tip that is of good quality and length you can apply to become a Premium tip expert.

May 23, 2011 | Dell E152FP 15" Flat Panel LCD Monitor

1 Answer

My DELL E151FPb LCD Monitor turns to white screen.


unplug the monitor on at the back fo the computer but leave the power plugged in and if you can see red,green ,blue bars jumpign around the screen it means that the monitor is good check the video card, but if you cant see the colored bars you need to get it repalce.this is monitor selft test process

Apr 15, 2010 | Dell Computers & Internet

1 Answer

Dog chewed cord in half. Not power cord - feed cord. I have it apart, where can I get a new cord. Its a Dell flat screen monitor- Model :E151FPb


You need a DB15 Video cable, they are available at say... Radio Shack, or the like, any good PC store should have them.

Feb 21, 2010 | Gateway FPD2275W LCD Monitor

1 Answer

E173FP monitor fix


Depending on when you bought it. There should be at least a one year warranty. If its still under warranty have dell replace it.
Mark

Mar 25, 2009 | Dell E151FP 15" Flat Panel LCD Monitor

1 Answer

Monitor Blackout


Here is a website that provides instructions to repair the inverter on a similar model:

http://josepino.com/?howto-repair-dell

Feb 23, 2009 | Dell E171FPb 17" TFT LCD Flat Panel...

2 Answers

DELL LCD monitor E151FPb turn white


If the screen is all white light then you can have a number of problems.
One could be a bad video board, the next could be a simple loose wire from the video board to the back of the lcd screen OR a simple blown fuse on the back of the actual lcd screen can cause the same thing.
Snaps are all sround these things and can be really stubborn at times. Best to start the bottom first then work up each side to the top.
Something flat, thin and with a decent sharp edge on it will help. A pocket knife held parallel to the joint between the front and rear plastic works, you can also sharpen the edge of an old credit card with a file (nail file works) This isn't as strong as a blade , but safer if you slip !!
Fran

Oct 10, 2008 | Gateway FPD1975W 19" LCD Monitor

2 Answers

Dell Monitor Failing


its the problem in the EST of the monitor.just get it replced to solve the problem.
pls do rate the solution

thanks.
regards.
fixya expert team

Sep 02, 2008 | Dell E152FP 15" Flat Panel LCD Monitor

1 Answer

Wacko Dell E151FPB


that sounds like a computer problem, not a monitor problem.  Plug the 'old' monitor in and see if your computer will boot with it.

Oct 14, 2007 | Dell E173FP 17" LCD Monitor

Not finding what you are looking for?
Dell E153FP 15" LCD Monitor Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...