My PS2 Slimline SPCH-75001 has problems spinning some discs. It'll try spinning, meaning it'll start and promptly stop and repeat this about five times, and then it starts to spin. But it spins slowly. I know the laser works because it reads my Codebreaker and a few other games. How do I fix this? If you can troubleshoot me, I'll make another post or message you somehow to give you a more personalized contact.
Re: My PS2 Slimline SPCH-75001 has problems spinning some...
I would replace the spin motor its under the the loader in the middle of the tracks.... you only have a positive wire and neg wire to worry about. If this helped vote fair
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
first, make sure the disks themselves are clean and free of scratches. often as not a disk read error on a PS2 is because of dirt. if the disk has a blue back, however, there's a special proceedure to get them to run (the blue ones are still in CD format instead of DVD)
seems like you need to go buy a lens cleaner from bestbuy or something. Run it repeatedly untill it works. sometimes it takes a while. But it will work after. please rate@
If it isn't spinning then a nob in the top right corner of the disc protector (built into the playstation) is broken off. Where The disc would have spun is a hole to the BOTTOM right. Inside that hole is a switch that the nob would have pushed when you closed the disc protector. Find something to push the switch. I used the A/V jack from my wii. Yes i had the same promblem...
Believe me or not, i have the exact same PS2 model no PS2. Most models had Lens problems of 75001, si thats the reason, I chnaged my PS2's lens for 25$ and now all's fine, so change yours too mate!
just take the disk out for a min and give a good wipe and without spittin, blow inside the umd tray. The laser going bad is a pretty common issue with the drives, spindle motor could be all gunked up with dirt as well and cause that issue also.
or it could just be the laser. can also try and clean the laser lens.
my friend i have a ps2 that its cd does not rotate ( i open it completely ) and the lens is working the lens is producing a red ray and it is movinng up and down but just the cd motor doesnot rotate so i checked the smd fuses using my fluke dgital multimeter i found one that is open when i replace it the ps2 work perfectly fine for your information the smd fuses are marked ps1 ps2 ps3 ps4 etc
×