Question about Nikon COOLPRINT Thermal Printer

Open Question

The printer fails to print

The printer always fails to print. It even cannot print test pages.

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Printers always prints test page

Try to check this article if it helps:

Nov 13, 2012 | Lexmark E321 Laser Printer

1 Answer

How I know which cartridge is damaged in a HP Deskjet 810C? Thanks You

The printer does not tell you and even if it did, it would probably be wrong half the time. If you print a test page on a known good printer and then print a test page on the failing printer, you can get a good idea by comparing the two whether it is the color cartridge or the black cartridge that is failing.

Dec 28, 2010 | HP DeskJet 810c InkJet Printer

1 Answer

I have an hp printer p1505, the paper jam is always on

I just had this issue and called HP. Even though the printer was out of warranty, I was able to go through some troubleshooting steps over the phone. IF you open and close the top cover 5x, it will print out a self test page. That is the only self test page that prints. Afterwards the computer will detect the printer and it will print just fine.

Dec 20, 2008 | HP Printers & Copiers

1 Answer

It automatically print a page everytime I start my hp psc 1315

Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.


1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.


Dec 08, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Test printing

If you've recently changed your cartridges, the printer will try to print a test/alignment page. Note the instructions on the test page indicate what to do to complete the testing/alignment procedure.

1) Let it print.
2) Place the test page upside down on the scan plate.
3) Hit "Scan" and let it finish.

When the machine completes the scanning procedure, you'll be able to switch the printer on and off or reboot your computer without it printing the test page. By Dubbya

Sep 16, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

MY test page always prints


I belive that after replacing the INk cartridges, you are experiancing this problem. The Alignment test sheet always prints everytime you turn on the printer, if u haven't completed the Alignment process.

To complete the Alignment process,
>>Once the printer finished printing the Alignmnet test sheet.
>> Place the Test sheet staright on the scanner glass facing down towards right hand corner.
>>Press the scan button(color), the Power ON light will start flashing, wait until it stops flashing.
>>Alignmnet process completed.

Thank You

Feb 09, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Cant print even test page

hit "start" and go to Printers and Faxes. In the side bar, choose add a printer, follow the instructions in the wizard to automatically, install and use the printer. Also check and make sure that you have any software that comes with the printer, as some of them need it in order to run. If all else fails, uninstall the printer by selecting it in the Printer and Faxes, right clicking and select DELETE. Then follow the above steps to reinstall it.

Jan 18, 2008 | Epson TM-U220D Matrix Printer

10 Answers

My printer keeps printing the test page every time it's switched on

0.gif Re: HP PSC 1513 all in one by Bert t.gif (9/25/07 1:07 PM) reply + / -

0.gif Re: Re: HP PSC 1513 all in one test page always pr by Anonymous (12/12/07 6:14 AM) reply + / - Subject : How to disable the test page that always prints when you switch on the HP PSC 1513 all-in-one printer.

Take the test page ( also called : alighnment page ) that always prints when you switch on the printer and place it face down in the scanner.

Then press the scan button on the printer itself.
(this is the button at the bottom of all the buttons on the printer/scanner.)

Make sure that the printer scans the test page.
( sometimes you press the butoon and it doesn't scan )
( it makes a scanning noise when scanning succesfully )

Then it will stop printing the test page ( alignment page ) ever again.

This is a really stupid product feature on HP's part to waste ink and force people to buy more cartriges.

Nov 29, 2007 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Printers & Copiers Experts


Level 3 Expert

93738 Answers


Level 2 Expert

246 Answers

Ric Donato

Level 2 Expert

201 Answers

Are you a Nikon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides