My amps will not power on i have power to the amps

there is a " Remote" terminal

it should be connected to positive ( +) 12 V supply too.


if the remote is already connected and have a 12 v supply

and the unit is in protection


it means you need to disconnect speaker connected one by one
till the protect goes out., turn it off first by removing 12V on the
"Remote".


if all the speakers and all the input is disconnected and still you are
in protect mode, you just have a bad amp.

if you want to DIY then let me know , your soldering skills and
voltage measurements inside will get the unit going again.

hope i have helped you, thanks for using Fixya!