Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

Belkin ADSL2+ Modem with Wireless G Plus MIMO Router

Hi
I just replaced my previous Belkin router as the Wireless was dropping all the time.
Now I got this new one. I installed it but even though the connection in the WAN and the wireless is stable, it is not connecting to the internet. Internet light is off.
Could you please assist?

Posted by on

  • 1 more comment 
  • Big_juancho Jan 06, 2008

    I have the same problem but using my Belking G router with an ADSL Zhone modem...
    how can i solve this trouble?

  • karommel Feb 12, 2008

    I have bought belkin GplusMIMO for my macbook but i can't get a wireless internet. i run the software but not compatible as read...

  • qwertyic2 Mar 04, 2008

    I have the same problem. Belkin has shipped me out a new router from thier wharehouse. and same thing happens. now there techsupport says i have to "bridge" my modem. the only diffrence with my problem and yours is that mine will only connect for about 10 secs. then disconnect and retry a min later. i am going to have to try and contact telcom itialia about bridging the router they gave me.

×

Ad

1 Answer

Me Two, I just reboot my cable box and router box, i do wireless online gaming and every bout 10 mins, i get disconnected even though i have full signal, on he routers web interface settings I have everything up-and-running and thr top right hand corners says connected, but when it drops I just realised that the internet light stops blinking aswell..???
What is this, this routers is way too annoying keep getting disconnected from every god damn game.
Keep me up-to-date if you what the preoblem is.
And oh, the person who can't get on the internet even though his ''WAN'' Says Stable i have 2 possible reasons.

In the address bat type in the following..
192.168.2.1.
look on the left of the screen you can see DNS, if not already ticked, tick the the little box which states.
'' Automatically assign DNS by IP'' then Apply Changes.
Or, Go Straigt down to the bottom and go to system settings, also go down to the very bottom. At this poin you can see A option or '' Advanced Featue! '' Menu saying, UnPn or something lol, click the box which says enable or something.

Hope this has helped

Thomas Miezavs

Posted on Jan 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Cannot set up my wireless G plus MIMO router !


If you connect the computer directly to the modem, does it work?
If that works then the modem is working.
Now connect the computer to the router and the modem to the router.
You will need to open the set up page of the router to check the settings of the router.
You can set up the router without the CD also.
It is very easy.
Click Here for step by step instructions about how to set up the router

Dec 27, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Belkin wireless G+ MIMO ADSL2 + modem routerF5D9630


You need to find out what settings need to be changed in the router to communicate to the new modem. Etisalat should have some type of instructions on how to configure it...Does the IP address get obtained automatically or is it manually configured. Does the modem require authentication..like a password. Did they replace the modem or just upgrade the system? You may just ahve to reset the modem and router to get reconnection. Most routers use the IP address of 192.168.0.1 or 192.168.1.1 to get to the router settings control panel. Just enter one of these addresses on internet explorer and a screen should ask for a password. The default password is usually ADMIN but consult the routers manual for instructions. Once you are in the router control manual you can configure the router to work with the new system.

Sep 08, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Trying to create a bridge with two routers


You do not need a bridge if you are using a wireless adaptor on your pc in the other room. Just set up the Belkin Plus router to the WEP security settings you want and make sure the pc wireless usb adaptor has the same settings as the router. You should be good to go. Good Luck.

Jul 15, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Line-drop problems on Belkin G PLUS MIMO Router F5D2304


firemware update can fix this issue if it is an issue with rtr .... try connecting a comp to modem and observe connection first if it is fine then update firmware it should work

Jun 19, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Connect router to playstation 3


You need to first plug the DSL modem into the router. log on to the router. Configure the router byusing the user name and password as supplied by your dsl provider. once the router connects to your dsl provider, you should be able to connect your playstation to the wireless network.

Jun 02, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

Modem light blinking and no internet in the wireless router. but when i run a cable from my modem to my computer, internet works....but when i rund the cable from the modem to the belkin wireless...


you have to unplug your cable modem before you connect the router. after you have connected the router you plug the power back on the cable modem then the router and you should be able to browse the net

Apr 21, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Problems with Belkin Wireless G Plus MIMO Router


- Nope, it is not possible, you may need an Access Point to do it.

Mar 11, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Belkin g+ mimo router can't detect internet


have you tried resetting the network adaptor on the belkin, whictch provider are you using for internet connection?

Jan 25, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Connection dropping


If the lights are flashing - that's OK. Wireless light will flash because the connections and beacon transmission, port lights will flash because of local connections. We can troubleshoot this for a while but I think this might be a problem with the box. Probably the best option is to replace it. In case you would like to play, try to run Ethereal and capture the packets and analyse them.

Jun 09, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...