Bissell Pro 2X. The brushes spin as soon as I turn it on but only spins for an instant then it quits spinning. The vacuum stays running. the handle is down.
it might be the drive belt slipping if the unit is off then the belt is locked onto the belt and then when the unit is switched on the belt slips and if its loose it doesnt hold the belt to the motor shaft
i was cleaning the tank and the parts on the black plate on the bottom of tank came out. i cant seem...
(More)
i was cleaning the tank and the parts on the black plate on the bottom of tank came out. i cant seem to re assemble them correctly. any one know how they go back together
The cleaner stopped working one day when a bang could be heard followed by a burning smell. This...
(More)
The cleaner stopped working one day when a bang could be heard followed by a burning smell. This caused the main ringmain MCB to trip. On opening up the cleaner I found a 250v 15A microswitch located within the right (looking from front) wheel housing was burnt out to the point that the normally open (NO) contact had fallen out due to melting in the switch assembly. Local charring could also be visible. I replaced the microswitch and once I turned the machine back on the motor operated for approximately 2-3 seconds before tripping the main ringmain MCB. Does anyone know what is causing this or similar problems? Thanks Carl
i can't get the solution to spray or suction from the floor . the hand attachment will spray...
(More)
i can't get the solution to spray or suction from the floor . the hand attachment will spray somewhat and suction, but not from the floor. i have the blue 9200
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.