I have: Panasonic 42'' TV. Yamaha RX-v663 receiver, Panasonic Blue Ray disc player and direct TV since Sept. 2008. Prob. 3 days ago I got a message on the TV: Shutting down in 3 min's etc. I can get the menu on my TV, the hdmi 1 receiver info, but I can't get a picture on the TV. I get the sound from the radio when I turn the receiver on, but when I turn on the TV, I get TV sound and no picture. The Geek squad hooked this all up for us and nothing has been touched fron them until now?
a panasonic tv will shut down after a short time with no video input. it sounds like the setup menu in the receiver has defaulted and needs to be setup again to coordinate the audio and video signals. ive seen many yamaha menus default. dont let geeks in your house.
Hey guys, My RX-V661 has been working dandy for over 2 years now. However, just recently the sound...
(More)
Hey guys, My RX-V661 has been working dandy for over 2 years now. However, just recently the sound has ceased to work. Speakers are all secured and the unit is pushing power out through the positive and negative connections for speaker wires on the back (I checked with a multimeter). I have checked all the modes to make sure that the audio mode was set to 'Auto' and have reset the unit several times. No sound for any type of connection works (i.e. DVD, DVR, VCR, DTV, iPod Dock). I was thinking that maybe a capacitor was blown in the unit? But we haven't had any storms or power surges within the time frame that it quit working. Figured I'd give it a shot on here to see if anyone could help?
zone 2 not working. it says vol fixed. in options menu, zone 2 says not assigned. What do I do?...
(More)
zone 2 not working. it says vol fixed. in options menu, zone 2 says not assigned. What do I do? Thanks
HTR 5460 will not scroll through OSD display settings-only shows off, then switches back to dsp...
(More)
HTR 5460 will not scroll through OSD display settings-only shows off, then switches back to dsp setting. No OSD display on plasma tv via s-video cable. I've disconnect TV input from Sat receiver to TV, and checked TV inputs. Suggestions?