Question about Teac DC-D4800 Shelf System

1 Answer

Innvoage MP3 video player gives error message

Is there any way to fix this

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: Innvoage MP3 video player gives error message

What error message does it tell say clearly the problem

Posted on Jan 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Radio works fine. cd player wont read discs in either of four slots. Message - Disc error.

This can often be solved by opening the cover and blowing on the optical head to displace dust and any debris that is fouling between the optics and the actuator that controls the head position. It isn't fool proof but will fix perhaps 40% of units. Take a can of air duster (aerosol blower) and blow the little pick-up form the distance of about 1 inch. It will bounce around in the wind but don't blow to hard. Give it a gentle blast and then try the player. If it doesn't work then try again this time but blow harder.

Feb 27, 2012 | Bose Wave Music System CD Shelf System

2 Answers

Will not play cd's and gives error code

I am not sure it is much help but as far as I know the eprom is in the computer. The computer is directly below the CD player.
So duff computer?

Nov 12, 2009 | Nostalgia Electrics Classic Music Jukebox...

1 Answer

Loud buzzing when I insert a tape in my car's stereo

Hiya, first try a normal cassette, see if that plays OK. If so the deck is probably fine, if not then the deck is faulty (probably not serious though and just a loose wire on the head).
If the connection between the tape and MP3 is a cable, the fault is quite likely there (if bluetooth then not). I strongly suspect the cable from the previous issues also.

Best of luck

Jul 15, 2009 | RCA RS2640 CD Shelf System

1 Answer

Cant connect my Kenwood NV-500 with my mp3 player ?

Yes it can be,always remember that the out of mp3 player is going to IN to your Kenwood NV-500...

Just click and choose whatever connection you want;

DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..
Plasma or Video Projector Wiring Guide

Blue-ray Surround Wiring
Hope this may help;



Aug 18, 2008 | Kenwood Audio Shelf Systems

1 Answer

RCA 2656 bookshelf music system cd door

I have a similar stereo system and accidentally put two CD's in one tray and it got stuck and could not open. What I did was unplug everything from the unit and took off the side panel. After some careful fiddling I got it to open. You could try something like that.

Dec 30, 2007 | RCA RS2531 CD Shelf System

3 Answers

Cd player

M-Error is a mechanical error and could have a multitude of causes. just went through it with a TAD-5160 unit where it was a small slip gear moving a tin lever to ingage the transport sled to insert or eject the disk from and to the carusel. You may have to take the unit apart and asess the problem. Harleysp.

Mar 19, 2007 | Fisher 9925 Shelf System

1 Answer

'no disk' error message

Replace the strip connection wire that connects the Laser Picku Unit to main board. If the fault prevails, the Laser Beam emission to your devices' Laser pickup unit is less, and must be replaced with same type and number. OK.

Dec 25, 2006 | Sony CMT-NE5 CD Shelf System

2 Answers


i have the same problem!!!
do anybody knows how to fix it??
thank you very much

Oct 26, 2006 | Sony DHC-ZX50MD Shelf System

Not finding what you are looking for?
Audio Shelf Systems Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio Shelf Systems Experts


Level 3 Expert

57192 Answers

John Trigg

Level 2 Expert

250 Answers

The Knight
The Knight

Level 3 Expert

66623 Answers

Are you a Teac Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides