Question about Acer AL2416W 24 in. LCD Television

Open Question

Acer AL2416W No Signal

I have a No Signal error - same for both inputs (svga/dvi). any ideas?

Posted by on

3 Suggested Answers

  • 3 Answers


that sounds like that may be the problem. i have it connected using the hi def component wires with the red, blue, green inputs. i guess that's the only way to do it at this point until i get a new tv. thx

Posted on Apr 01, 2008

SOURCE: hdtv stb issues hdmi - dvi for Acer AL2416W

Buy a name brand STB !

Posted on Apr 15, 2008

  • 1 Answer

SOURCE: hdtv stb issues hdmi - dvi for Acer AL2416W

I have a Acer AL2416W and a PS3 and cannot get them to connect using hdmi - dvi
how did you get yours to work

Posted on Jun 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How do I get my HDMI ports to read 1080i instead of DVI?

The question really doesn't make sense. That's because 1080i is a signal resolution, and DVI is the connection cable that carries the signal. The two things are connected, but different.

It sounds as if your TV is searching for a signal; looking first at the HDMI input, and then the DVI input, before giving up because it found no signal.

Your next question should add some detail about the makes and models of the equipment involved and how you have them connected.

Sep 04, 2014 | Flat Panel Televisions

3 Answers

How do I connect my PS3 to my sanyo dp50747 in hdmi? I have everything hooked up correctly, but its not coming up on the TV. What do I do?????

If you see a no signal message, then it means that the signal output format of the PS3 does not match . It happens if you have previous used it on another tv and now connected it to a different tv. To resolve this, turn off the PS3 . Press and hold the power button on the PS3 till you hear three BEEPS. The PS3 should automatically detect the tv's resolution and the initial setup screen should appear. After that you should just follow on-screen instructions to set it up.

Sep 26, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

I nneed that part. - TDB292LF - ACER INVERTER BOARD FOR AL2416W

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers, for spare parts and service, Driver downloads and Installation Instructions as required.

I have searched ebay and there are non on there for sale at present but I have seen them sell for a few pounds.

I hope this helps.

Dec 30, 2010 | Acer AL2416W 24 in. LCD Television

1 Answer

Screan comes on for 1 second then goes black. switch light showes recieving signal.

This Acer 2416w has problems with weak capacitors on the inverter board causing shorting of the driver FETs. Replacing caps and shorted FETs may solve the malfunction.
Monitor Mike

Oct 04, 2009 | Acer AL2416W 24 in. LCD Television

1 Answer

No sound when my computer is connected to my Sony Bravia TV

If your computer has a svga output use input 7 on tv with vga to vga cable and 3.5-3.5 Radioshack 42-2387 cable for audio for best results. If you use the dvi to hdmi on input 6 on tv use 3.5- rca Radioshack part number 42-2551 1/8=3.5mm.

Apr 20, 2009 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

Use of HDI-V input on PPM42M5SBx

the answer is no as VGA is a analog connection whereas the DVI connection is digital just like HDMI.
A DVI input on your display wont understand the analog signal and vise versa, hope this helps

Jun 17, 2008 | Samsung PPM42S3 42 in. Plasma Television

2 Answers

Connecting tv to dvd player

It should be fairly straight forwards.. Simply get the SCART to SCART Cable.. Connect up the Two, DVD to Screen, turn them on, selecting any input/outputs Format etc, setups from any Menus...then start player select "Play" & ya should see the Picture & hear the sound...

Aug 31, 2007 | Philips 30PF9946 30 in. HD-Ready Plasma...

1 Answer

Problems connecting computer to tv via dvi

Not sure if you have fixed your problem or not. When I hook up my pc to the ILO 32 HD...I ran DVI input for can also use HDMI if you like..I had a problem with sound and had to use a splitter and run sound into AV2 IN to get sound for some reason...your no picture...if you are getting a black screen, you need to set the resolution on your pc. VGA to 640x480 and SVGA should be 800x600 and XGA should set at 1024x768..most likely the last one is the one you need..and this is not a normal pc res....set your refresh rate to 60HZ. All this is done in the control panel/display/settings tab. Also remember that you need to change your source on the TV to the proper connection to see component, HDMI etc.

Apr 02, 2007 | iLO 3200 32 in. LCD Television

Not finding what you are looking for?
Acer AL2416W 24 in. LCD Television Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Flat Panel Televisions Experts


Level 3 Expert

6993 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Martin Murray

Level 3 Expert

1614 Answers

Are you an Acer Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides