There is an RC circuit that delays the final power up for a few seconds to allow the power supply to stabilize. I would guess that one or more of the components of that circuit are defective and increasing the "delay" time. Can you please confirm your mdoel number so I can look up the circuit?
Thanks,
Dan
Was this helpful?
Yes
No
Popular Solutions for Philips Magnavox 42MF521D/37
My Magnovox Plasma Model 42MF230A/37 has no picture, no sound. POwer LED on front cycles from blue...
(More)
My Magnovox Plasma Model 42MF230A/37 has no picture, no sound. POwer LED on front cycles from blue to red. No flshing led, just an internal relay clicking. I have removed the rear, noticed the large center board has 4 1" Diam capacitors that are bulging. Also a blue square capacitor that is bulging out the sides. I am an electronics technician, but have never worked on TV's. Are the bulging capacitors the only problem or is it just a symptom of a bad power supply?
Phillips tv which is connected through our DVD player, and has sky tv attached. A visitor fiddled...
(More)
Phillips tv which is connected through our DVD player, and has sky tv attached. A visitor fiddled with one of our controls and now we only have a funny yellow-green-purple coloured picture.How can we put it back to original. Sound is fine
I have a fine gray vertical line down the center of my Philips Magnavox 47'' LCD TV. It's only 2...
(More)
I have a fine gray vertical line down the center of my Philips Magnavox 47'' LCD TV. It's only 2 years old.