Hi there Im not very expert at using printers and ive lost my manual. Im using a canon mp140 pixma. the problem is there is a triangle with a lightning bolt in the middle this is lit up. the B and C circles below this are also lit up and E and number 5 keep flashing. what do I need to do to get this working again. Your assistance would be very much appreciated
Here is a link to Canon for your Pixma MP140. Troubleshooting Section.
E, 5
The FINE Cartridge cannot be recognized.
Possible causes are as follows: The FINE Cartridge may not be installed properly. The FINE Cartridge may not be compatible with this machine.
Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the Print Head Alignment. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=15294
Was this helpful?
Yes
No
Popular Solutions for Canon PIXMA MP150 All-In-One
When I try to print, the paper in the tray is pulled to the right and gets jammed...there doesn't...
(More)
When I try to print, the paper in the tray is pulled to the right and gets jammed...there doesn't appear to be a jam inside the printer
I got some paper stuck and now it says my ink is full, call service technician. It worked fine until...
(More)
I got some paper stuck and now it says my ink is full, call service technician. It worked fine until I got the labels stuck
The printer states that it can not read the ink cartridge, i have tried replacing the cartridge and...
(More)
The printer states that it can not read the ink cartridge, i have tried replacing the cartridge and this does not solve the problem
How do I scan a document so that it will come up on my computer as one whole piece? It will scan it...
(More)
How do I scan a document so that it will come up on my computer as one whole piece? It will scan it but show up as up to 7 different parts of the same document!