Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

2 Answers

Please help with Philips 60PP9202 picture issue

Hello! My Philips TV has a problem. The picture has green outline on the bottom. The picture appears to bow slightly inward on the bottom and top. I have tried to adjust each convergance manually with no success.
I am going to replace both IC's. Can anyone tell me what is the difference between STK392-110 and STK392-120. I have STK392-120 in TV right now. Can I use 110's instead?
Before I had same issue, but my TV was still on warranty my electronic repair shop replaced the *HDR* SSM *NLA* part number 313503711212.
Can anyone tell me what is was and how hard to replace that part?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Please help with Philips 60PP9202 picture issue
Never mind I managed to fix .2 resistorr 1watt 6.8ohm resistors3159&3160 .Better than ever.

Posted on Feb 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 232 Answers
Re: Please help with Philips 60PP9202 picture issue

Hi first answer is no you can`t use 110`s to replace 120`s the 120`s have a higher current rating. Second answer is the part number you gave is for a board that costs $230.04 plus s&h and can be purchased here I would either replace both IC`s or get a tech to do it, you can get them by calling this number 800-575-9833, they only sell the good ones, there are a LOT of chinese stk`s out there especially on the internet sites and they are CRAP, buy the originals and you won`t be sorry, ps the originals are actually made by Sanyo for Philips, good luck, BMW Rider

Posted on Jan 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a PHILLIPS scrren HDTV MODEL #51PP9100D/37 and it hs green and red outline on picture. Can you tell me what could be wrong? Can this be fixed? Didn't know if it is something I can do myself or...

Its a convergence problem. The three color guns have drifted and it shows on the edges. Typical of an old projector tv
These will help how-to instructions:

Mar 08, 2014 | Philips 60PP9202 60" Rear Projection...

1 Answer


no lamp for this model, it uses three picture tubes but the three D looking picture is a convergence circuit problem and is fixable.


Apr 04, 2012 | Philips 60PP9202 60" Rear Projection...

2 Answers

I have a friend with a Philips 60PP9202 TV, and she describes her problem as: "The top/bottom corner of the picture is kinda waved and the color is blue/red (3D like)". Would anyone have an...

The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 15, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Philips 60pp9202 - Sound and OSD, no Picture

I contacted my cable provider and he told me the tv defaulted to antena and reran auto set up I get picture but no sound cable man is coming to fix weak signal hope it fixes sound
I may need parts>>>haha

Sep 21, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Pink/green bar at bottom of picture

phillips are known for dry joints so i would check this first ,if you are good with a soldering iron.

visually inspect each pcb for poor solder connections and solder any bad ones that you find.

this should do the trick.

Aug 18, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Projection tv philips model number 60pp9202/17f

that sounds like the classic symptom of the convrgence Ics needing to be replaced they are STK392-120 you can get both replacement ICs at the following link with free instalation instructions. here is the link.

Jul 07, 2008 | Philips 60PP9202 60" Rear Projection...

2 Answers

Picture warped..Can't fix convergence because crosshairs are also warped!!

try these sites:

different tv same problem, same solution

Dec 05, 2007 | Projection Televisions

1 Answer

Picture problem

Convergence overhaul needed =====
1)Pull chassis
2)Replace Stk392-110 IC's x 2
3)reset alignment

  Usually a 400.00 repair at a tv shop......T.

Oct 18, 2007 | Philips 60PP9202 60" Rear Projection...

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides