Your Sentinel mower was manufactured by NOMA owned by MURRAY, both gone, aquired by Briggs&Stratton. I suspect the manual is NLA, many parts are still available thru power equipment dealers. What part do you need?
Popular Solutions for Briggs & Stratton Lawn-Boy
Briggs & Stratton Lawn-Boy Insight Series 21-Inch 190cc 650...
I have a John Deere 214 that threw the secondary drive belt. I am replacing the belt with a new one....
(More)
I have a John Deere 214 that threw the secondary drive belt. I am replacing the belt with a new one. The problem is, even though I have refered to the shop manual and the owner's manual, nothing shows a clear image of how the secondary belt goes around the idler pulley. I think I have it right, but the tractor doesn't move very well.
my playstation 3 had fallen of the top of the tv. when i turn the playstation 3 on the power light...
(More)
MY PLAYSTATION 3 HAD FALLEN OF THE TOP OF THE TV. WHEN I TURN THE PLAYSTATION 3 ON THE POWER LIGHT TURN RED THEN IT CHANGE TO YELLOW
I have a 1984 Lawn Boy 2 stroke push mower. It will start and idle roughly, but will not speed up. I...
(More)
I have a 1984 Lawn Boy 2 stroke push mower. It will start and idle roughly, but will not speed up. I rebuilt the carb with a new float, needle/seat and new spark plug. The carb almost ices up when doing this rough idle. What else do I look for to solve this problem of it not wanting to power up? Poor compression, ignition? By the way the fuel flow thruogh the fuel line is good and it doesn't matter where the speed control lever on the carb is slid to. Thanks
Hello I have a Briggs & Stratton Sovereign lawnmower and halfway through mowing the lawn...
(More)
Hello I have a Briggs & Stratton Sovereign lawnmower and halfway through mowing the lawn yesterday the accelerator stopped working and it was difficult to push the mower. The belt had come off and we have fixed that thinking this would solve the problem but it has not. Do you know what is wrong with the mower and how we can fix it? The booklet does not have any troubleshooting pages. Thank you.