Hi I have a 89 camaro and a clarion DRX55745 the problem is the guy that had the car befor me cut the wites of this radio instead of unplugging it. So I need to know what I will need to hook my sterio up I have the 12 pin plug for my sterio . If you can help with this prtoblem thanks .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
did you go to best buy and ask them if they have the wiring harness to adapt it to a 2000 chevy blazer if not write clarion at clarions website and ask them for the color diagram or you could also call your local car audio installation store and ask them as long as you have the model number and stuff im sure there shouldnt be a problem with that
This is the mesage it will display when a short in a speaker wire or
speaker with low impedence is hooked to the internal amp and sends it
into protect mode, shutting down the amplifier section while the rest of
the unit continues to work.
it means the radio code has been inputed incorrectly three times you need to disconnect the mains from the rear of the sterio for 30seconds to reset the memory then leave the sterio on till the error message turns into the - - - - where you input the code again.
red= accessories power on
yellow= power always on memmory
blue white= amp switch this goes to amp
blue= power antenna
the other wires are speaker wires top is for the fronts
the bottom set is for the back speakers this is simple
suggestion if you dont know the wire hook up i suggest taken the wires and sterio to certified car sterio installer pay 5 bucks and have them splice the wires together for you so you dont screw up your vehicle wireing or your sterio this is crucial
use a meter and check for the clock wire with the ignition turned off,,when u find it , use it for your memory wire as it has constant voltage or run a wire to the fuse box and look for the fuse that says clock and splice it in there