zanussi fjs1425w machine locks door when turned on before programe is selected. can move down progs, spin speeds, special features etc. can skip/move down wash sequence from wash through rinse and spin to drain but when start button is selected nothing happens. appears to be in pause mode, start light just flashes blinks. Tested both pumps & heater element & all seem good. Any ideas? Would Appreciate it if anyone has circuit diagrams for this too. Thanks, Scott.
Comments:
Nov 03, 2009
- Thanks but I checked the basics before pulling the machine apart for testing, I'm wondering what kind of fault causes this scenario?? PCB, door interlock water level sensors. Would like to get hold of circuit diagrams & expected values so I can trace water level sensors, door interlock & PCB I/0 values.
Check start delay time ( if your machine has one ) , If any time is set on this the machine will not start untill that time has elapsed or is cancelled.
zanussi jetsystem 1200xc fj1254w - door interlock came on as soon as door was closed. will allow...
(More)
zanussi jetsystem 1200xc fj1254w - door interlock came on as soon as door was closed. will allow changes to programs etc but as soon as start is selected it just beeps & continues flashing (start button- 5th led across)
The LED display disappears and the cycle stops. I have to press the green start/pause button to...
(More)
The LED display disappears and the cycle stops. I have to press the green start/pause button to restart the cycle.
i keep getting error messgae e20 when using dryer part of zanussi jetsystem turbodry 1200. it just...
(More)
i keep getting error messgae e20 when using dryer part of zanussi jetsystem turbodry 1200. it just beeps and stops drying