Ink Absorber full,needs changing.How do I Change

You need to disassembling the hole printer to find and replace the ink absorber.It's on the bottom from right side under the pump station.
Also you need to reset the ink counter:
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.