Question about Remote Controls
I was able to get my Motorola DVR Cable Box to work with my Universal Remote using the following instructions:
The Instruction Manual for Manual Code Search seems incorrect. (Page 5).
A) Manually turn on the device to be controlled. (O.K.)
B) Press and hold the code search button until the red indicator stays on, then release the code search button. (O.K.)
C) Press and quickly release the desired mode button (TV, VCR). The red indicator blinks off once. (O.K.)
D) Face the remote control directly to the device you want to control. (O.K.)
E.) Press the ON/OFF Button (this should read CHANNEL UP button) repeatedly until the device to be controlled changes channel. The red button blinks off with each button press.
F) Press and release enter to install the code. (O.K.)
-Note, the remote is able to change the channel, however, it does not control the volume.
Posted on Jan 27, 2008
Tips for a great answer:
Oct 16, 2012 | Sentry Safe Sentry RMC10 Universal Jumbo...
Apr 10, 2012 | Remote Controls
May 27, 2010 | Sentry SE-RMC10 Remote Control
Oct 14, 2008 | Directed 434MHZ Remote Control
Sep 06, 2008 | Zenith DBZN-311 Remote Control
Feb 07, 2008 | Remote Controls
Jan 26, 2008 | Directed 434MHZ Remote Control
195 people viewed this question
Usually answered in minutes!