Question about Southern Telecom Emerson Bluetooth Headset Black Wireless Headset

1 Answer

Headset won't accept PIN number from user manual

Headset is fully charged. After numerous attempts, it continues to say that the PIN number is not valid.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: headset won't accept PIN number from user manual

CHARGE THE DEVICE FOR EXACTLY 14 HOURS FROM WHEN IT IS DEAD! NO MORE NO LESS!!! THEN TRY you DEFAULT CODE ( '0000') if you do this right i promise it will work. any other problems call customer service 1.877.768.8483 Mon-Fri: 9AM-5PM {EST}


Posted on Feb 02, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to pair it with galaxy tab 4

This is for the 1900, but should be the same. Go to Bluetooth settings on your Galaxy.
Samsung HM 1900 User Manual

Aha, I found this for the 1500

4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2. The headset also can be paired via the Active pairing feature, see page 14. Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two Bluetooth phones at the same time. 1 After connecting with the first Bluetooth phone, press and hold the Talk button until the blue indicator light stays lit. 2 Press and hold the Volume up button to activate the Multi-point feature. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone???s user manual). 12

4 Select the headset (HM1500) from the list of devices found by the second Bluetooth phone. 5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone. ??¢??¢ You can set the headset automatically to reconnect to the recently connected phones each time you turn it on. -- To reconnect to the two most recently connected phones, activate the Multi-point feature. Press and hold the Volume up button in Pairing mode until the blue indicator light flashes twice. -- To reconnect to only the most recently connected phone, deactivate the Multi-point feature. Press and hold the Volume down button in Pairing mode until the red indicator light flashes twice. ??¢??¢ When the headset connects to two Bluetooth phones, some phones may not connect to the headset as the second Bluetooth phone. English

Disconnecting the headset
To disconnect the headset from your phone, ??¢??¢ Turn off the headset. 13

Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect each time you turn it on. If the headset does not automatically attempt to reconnect, ??¢??¢ Press the Talk button. Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for a Bluetooth phone and try to make a connection with it. 14

3 Press and hold the Talk button until the violet indicator light turns on. The headset will switch to Active Pairing mode, search a Bluetooth phone within range, and attempt to pair with it. [. . . ] ??¢??¢ To switch between the current call and the held call, press and hold the Talk button. 19

Oct 30, 2015 | Samsung HM1500 Bluetooth Headset

1 Answer

The Headset Lifter won't pick up the calls. Nothing happens when I push the ear button to lift it up. I thought maybe it wasn't fully charged when I tried it yesterday. At that point, I made...

If the CS70 headset has a charge and beeps when you press the call control button, you may just need to re-pair or re-subscribe the headset to the base unit. Here is a link for the pairing / subscription instructions:

Plantronics CS70 Pairing Instructions

If the headset is not charging, the internal battery may be worn out and the headset may need to be replaced (the battery is hard wired and is not replaceable). The replacement headset is model 72910-01. Below is a link where you can purchase the replacement headset.

Plantronics CS70 Replacement Headset

Good luck from Headsets Direct!

Jun 24, 2011 | Plantronics CS70 Wireless Headset

2 Answers

Having issues syncing my Uniden BT112 Bluetooth to my BlackBerry Bold. I used this Bluetooth with another telephone and don't have any of the old packaging. I don't have a pin number. Help!

Please follow the correct instructions below to successfully pair your headset with the phone.Make sure that the headset is sufficiently charged before pairing.

Charge the battery
Before using your headset, charge the battery for at least 8 hours. Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery.

Pair the headset to your Bluetooth phone
Pairing is like "introducing" two Bluetooth devices and giving them permission to connect to each other. If you want to use the headset with more than one phone, you need to pair it with each phone separately. Once a phone and the headset are paired, they can connect automatically whenever they detect each other.
1. Make sure the headset is powered off and the power adapter is not connected (you can't use the headset while it's charging).
2. Press and hold Power until the LED flashes alternating red and blue. The headset is in pairing mode and should be visible to other Bluetooth devices.
3. On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone's manual for detailed instructions.)
4. Your phone should discover a device called a BT108, BT108 headset, BT109, or BT109 headset, When your phone asks if you want to pair with this device, answer yes.
5. When your phone prompts you for a PIN code or password to pair with the BT108 or BT109 enter 0000.
6. When the headset is paired, the LED turns blue and flashes every 3 seconds. Your phone might display a confirmation message, also.
7. Your phone might ask if you want to change the headset's name; generally, you should only change the name if you have more than one BT108 or BT109 headset that you use with this phone.
Connecting to your phone
Most phones connect to the headset as soon as you pair it; if yours won't, turn the headset off and back on. If headset still won't connect, check your phone's owner's manual for additional Bluetooth information.
Once the headset is paired:
Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last.
If the headset loses the connection (e.g., if your phone is out of range), it reconnects automatically. To manually reconnect, press Power.
If the headset goes more than 1 hour with no connection, it automatically turns off.

If you need further assistance please leave me a reply.Hope you are satisfied with my solution.Your valuable feedback would be appreciated.Thanks for choosing Fixya.


Jun 15, 2011 | Uniden BT-108 Bluetooth Headset

1 Answer

My headset is charged, but it won't power on.

You can try letting the battery die completely (this make take a week or so) then plug it back into the charge and let it recharge fully. I would delete/disconnect headset from your phone in the mean time. Once headset is fully charged again put it and phone in pairing mode and see if it will work properly for you this time. User guide listed below.

Plantronics Voyager Pro User's Guide

Good luck from Headsets Direct!

Mar 20, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

I have a samsung phone and i am trying to pair it with my jabra vbt185z but i don't know the passkey...i tried using 0000 but that didn't work. so what else can i do to make it work?

You do need the passcode. It should "auto pair" but the default passkey or pin is 0000 (4 zeros.)

Here is a link to the user manual

Headset Pairing Readiness Instructions:

1. Fully charge headset for two hours.

2. The headset will automatically go into pairing mode if no device has

been previously paired.

3. Set your mobile phone to 'discover Jabra VBT185Z'.
4. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.


Dec 31, 2010 | Jabra BT150 Wireless Headset

1 Answer

How to pair with iphone


1.From the main home screen of the iphone open "SETTINGS".

2.From the setting menu go to "GENERAL".

3.From General go to "BLUETOOTH".

4.In the Bluetooth menu you will see an on/off switch. Make sure you turn the switch to "ON".

5.From here you want to go to your bluetooth headset. Hold the on button for about 5-10 seconds until the light starts blinking. Once light is blinking go back to iphone.

6.In the Bluetooth menu (same as step 4) your iphone should have discovered your bluetooth headset. However if it is not paired yet. Open the headset menu.

7.In the headset menu you are required to enter the appropriate PIN number (which should be given inside your bluetooth headset instruction manual).

8.After you have entered the correct PIN number press connect.

9.From here your Bluetooth Headset should be connected and ready to use.

NOTE:Fully charge your bluetooth headset before syncing it to your iphone


Apr 16, 2010 | Samsung WEP410 Bluetooth Headset Wireless...

1 Answer

I am attempting to pair a motorola H500 bluetooth headset to my samsung phone it is asking for a numeric pin. what do you do?

Pairing the headset with a phone is a simple task: just hold the multi-function button for an extra few seconds when turning the H500 on, and the blue LED call indicator will turn on. This means that the headset is ready to be paired, and can be discovered with any phone, PDA, or computer that supports the headset or hands free Bluetooth profiles. As is the case for most headsets on the market, the PIN code for the H500 is "0000".

Dec 24, 2009 | LG HBM 730 Bluetooth Headset Wireless...

1 Answer

Pin number

The pin number for pairing every bluetooth is 0000.

I hope that solves your Problem, If so kindly accept it.

Thank You,

Apr 10, 2009 | Motorola Mobility H550 - Bluetooth Headset...

1 Answer

HFBLU-LT100BK Bluetooth keeps "pairing failed"

headset won't pair with me phone and i have tried 0000 and 1234 and 12345

Jan 30, 2009 | Cellular Innovations HFBLU-CX1 Wireless...

1 Answer


To initiate pairing, put the devices within 0.5m of eachother

Make sure phone / pc bluetooth is on and discoverable
Make surea headset is fully charged

  1. Ensure headset is switched OFF
  2. Press and hold the talk button (big central button on front of headset) until the indicator flashes red & green alternately, then release. Headset now ready for pairing.
    Note: Headset pairing mode will time out after 5 mins.
  3. To allow phone / pc to "find" the headset, consult your phone / pc bluetooth operating guide on pairing devices.
  4. Headset should be listed on phone / pc after search has finished - highlight and select the headset.
  5. A pin or password screen will appear, you must enter 0000 and confirm.
  6. When pairing is successful, headset indicator will change to green and flash continuously every 3 seconds.
Pairing is then complete.

Note: Multi-pairing.
It is possible to pair up to two phones with the headset - the most recently paired phone becomes the "primary "phone... only one phone can be connected at a time --> this function only works in Hands-Free profile. If both phones are in range, then the headset will connect to the "primary" phone first.

Apr 09, 2008 | Headsets

Not finding what you are looking for?
Southern Telecom Emerson Bluetooth Headset Black Wireless Headset Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Southern Telecom Headsets Experts

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers


Level 3 Expert

18259 Answers

Are you a Southern Telecom Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides