if dryer is filled with lint or vent line is blocked the clothes will not dry correctly,shop vac is great for this it sucks and blows,vac out what you can see and then blow out the lint from back and on motor,clean out the lint duct,where ever you pull out your lint filter either on top or inside dryer you have to clean out the duct.now go outside and check the flapper,if it isn't blowing open or hardly opening i use a leaf blower and take off the vent line from the back of dryer and blow it out,good luck
Was this helpful?
Yes
No
Popular Solutions for Kenmore Elite 7.0 cu. ft. HE4
Kenmore Elite 7.0 cu. ft. HE4 Super Capacity Plus Electric...
dryer won't heat up and when you push to start button it starts to run but as soon as you release...
(More)
dryer won't heat up and when you push to start button it starts to run but as soon as you release the button it turns off
Kenmore HE4 electric dryer- relocated it and now the controls dont work- light comes on- but thats...
(More)
Kenmore HE4 electric dryer- relocated it and now the controls dont work- light comes on- but thats all. Any ideas?? Thanks
The dryer seems to be taking much longer to dry all of a sudden (2-3 times longer than just...
(More)
The dryer seems to be taking much longer to dry all of a sudden (2-3 times longer than just yesterday). It is tumbling, blowing warm air out the vent and all the controls appear to be working. It seems more warm than hot even though the temperature setting is at high. Could the gas heating unit be on but not heating as optimally? Thanks! Kirk