Kenmore Elite HE4 drier not drying all the way.Tested the moisture senor and wires okay. Tested the thermistor okay,tested wires @ Machine electronics okay. Vent is clear. But in diag mode and opening the door I get a beep and a code 49 on the panel.
if you have heat and the clothes take to long to dry you need to clean out the dryer the lint duct and blow out the vent line,also go outside and make sure there isn't a cage or something acting like a lint catch stopping air from blowing out where the flapper is
Was this helpful?
Yes
No
Popular Solutions for Kenmore Elite 7.0 cu. ft. HE4
inside light will not come on, kenmore elite he4 electric dryerwill not run, beeps three times when...
(More)
inside light will not come on, kenmore elite he4 electric dryerwill not run, beeps three times when start button is pressed.all lights on control panel are working.
I have a kenmore elite he4t gas dryer, does'nt dry well and you can smell gas when you open the...
(More)
I have a kenmore elite he4t gas dryer, does'nt dry well and you can smell gas when you open the door! thanks