My leads from my alpine monitor tvs have been damaged does anyone know were to get these or what they are called they run from the monitors to a wee silver box under my arm rest its alpine as well ta

try the guy you bought it from that stole it out of a car, see if he can get you the cables next time.

Check the VGA lead, it is possible that when moving the monitor, you damaged one of the pins that connects in the socket on the monitor, remove the lead and also inspect the socket if there is a broken pin inside it remove this and try a new vga lead.

If no pins are broken and / or the power is not even reaching the monitor, check the kettle lead, look for signs of damage to the rubber / plastic plug and the socket on the monitor (assume this one is fed directly from the mains?), If you have been unfortunate enough to have damaged one of the pins that is in the socket you will need a TV repairman to fix this.

Check also the condition of the lead itself, for breaks and whether the fuse in the plug has blown.

After that, your problem will need to be looked at by a qualified TV repairman, as the fault must lie on the board itself

Try contacting SpecialtyElectronics. They are international Ebay sellers.

Here the mounting brackets: Alpine Monitor Brackets CVA 1005 1006 IVA-D100 IVA-D310

or:

Alpine Monitor Brackets

The alternative is contacting Alpine:


Alpine Electronics, Inc. alpine.com

Alpine Electronics of America, Inc

less than one year then call the manufacturer for service. If it's out of warranty then double check you power leads but I suspect it's a job for the repair shop. Monitors can be cheaper to buy than repair so get a quote before you give it to anyone

i have the tme 780 black box for sell my mail is [email protected]

This is a fault in the LCD itself. Since you just purchased it, call HP (1.800.hpinvent) and they will fix it for you. Thanks and please remember to rate this solution with a rating of fixya. :c)

Hi...there,

Well... I hate to say, but you got a damaged panel. Thinking of replaced the panel... you can forget it.
Get a new one...it's will saved you the headached and $$$... Have a nice day!

you need to put the dvds handbrake wire to a suitable earth point and then your dvds will play fine i think the wirings colour is a yellow with a blue tracer line on the wire if its an alpine dvd player and the same is on all the monitors themselves that wire will have to be connected to a good earthing point but luckily on the monitors they have a black earth wire running to them so just splice that yellow/blue wre into the black earth wire on each headrest monitor !

As you are not able to see red color on your monitor means you will be seeing green+blue=cyan color your problem is that red signal is not coming to red cathode of your crt. please check 1 connector loose(cpu to monitor) 2 crt base loose. 3 loose or print or dry near red cathode circuit 4 red video output. 5 red signal from processor to red video is missing 6 processor ic. good luck

Most of the time when this happens it is due to a bad monitor, if you have another pc try to hook this monitor up to that one to see if it actually works, these monitors sometimes get damaged during shipment!