Question about Philips 51PP9303H Rear Projection Television
My DVI connection is on channal AV 5 i can no longer find AV 5 it seem as though im missing some software or something any help would be appreciated greatly
You can get a convergence kit with a photo instuction guide from www.TvRepairKits.com. The kit is for your exact model and includes the 6.8 ohm resistors.
Posted on Dec 15, 2008
In your set you have three circuit boards.
The one on the far left is the SSB, middle board is the LSB, and the board on the right is the power supply board.
Try yanking cable 1516 that connects the SSB to the LSB. Its a small white ribbon cable.
Does the set turn on now?
If so your convergence chips are shot and need to be repalced. You can get a replacement kit and instructions from www.TvRepairKits.com. If the set tubes still don't light up after yanking 1516 the problem is elsewhere. Most likely the HVG.
Posted on Jan 07, 2009
If you are not sure how to find/repair/replace the HVG yourself goto www.TvRepairKits.com to get their how to guide that includes the part numbers, suppliers, instructions, etc.
Posted on Feb 13, 2009
Get an HDMI to DVI adaptor and use a generic HDMI cable.
Lots of DVI MALE to HDMI FEMALE adaptors out there:
Ultralink, Monoprice, Monster etc.
Posted on Jan 01, 2010
Tips for a great answer:
Oct 13, 2011 | Philips Magnavox 51MP392H Rear Projection...
Nov 02, 2010 | Philips 51PP9303H Rear Projection...
Jan 06, 2010 | Philips 46PP9302 46" Rear Projection...
Jan 01, 2010 | Philips 60PP9352 60" Rear Projection...
Dec 07, 2009 | Philips 51PP9303H Rear Projection...
Oct 13, 2009 | Philips 51PP9303H Rear Projection...
Oct 16, 2008 | Philips 51PP9303H Rear Projection...
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: