When i put my sim card into sciphone i9 phone, it says no service or select network. how do i solve this problem? i went to some of the handphone repairers, they cannot set it also.

here ;

http://search-manual-online.com/pr-log-sciphone-i9-3g-dual-card-java-cell-phone-manual.html

Go to this website www.i9forum.co.uk register and check the forum out for a solution, I've had a quick look but its mainly about mms & gprs. If this is what your after the settings the instructions are there on how to set it up.
I'm with Telstra 3g and have the new sciphone i9 3gs and it works great.

To get the security code to unlock the cell phone from the current cell phone provider so you can use it with a different phone provider, Please click on this link and follow my instructions :-
http://www.fixya.com/support/r4049238-unlock_cell_phone
If your phone provider does not help you then this WEB site it provides security codes for a small price.
http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHw
Try this WEB site also - Unlock Free
http://www.unlock-free.com

For I9 support visit to following website: http://www.i9forum.co.uk/. You will have to register to access the site. For your sim card turn it over. It should face up in the bottom bracket and down if you are inserting it into the top bracket. I hope this helps.

When you place your T-Mobile SIM card in the phone, what does it shown in the main desktop? It should say T-Mobile, if it doesn't, then you are either placing the SIM card in the wrong way, you are not in the best place to get a good signal, or the SIM card slots in the phone is in Flight mode. To check, go to the SIM card profile and make sure that it says Dual SIM Open.

I guess your phone has not been unlocked yet. Unlocked phones do not have any specific carrier software and work with all GSM carriers. These include T-Mobile, Cingular and AAAA . Multi-band unlocked phones also will work with carriers in other countries.So I guess you need to unlock your phone so that u can enjoy in your country.

I see that this had been a while. The reason that your Sim cad doesn't work could be various: 1. Make sure that your phone is quad band, if it's a tri band then make sure that ATT works in 1900mhz. If it works only in 850 and your i68+ is a tri band, (which is not suppose to) then it will never work. As far as I know all i68+ original are quad band, some fakes i68+ are sold as quad band but are actually tri-band. 2. If you ATT sim card is a 3g card, it won't work either. These phones are not yet equip to work with 3g. I hope this clear up at least a little of your doubt with the Sciphone.

im try a diffrent network

okay turn your phone off take the back off ,battery and take the sim card out now put the battery back in with out sim card .. turn on. now go open sim and close sim 2... turn off...remove back and battery put sim card in slot 1 make sure its in all the way put battery and back on ... turn the phone on... give it a few minutes it should work....

Maybe your phone does not support the frequency of those providers. Check if it is Quadband. Then it should have no problems. If it has less than that, return it to the seller.