Question about Packard Bell (090317) Modem

1 Answer

Cant take apart packard bell imedia to install pci card

The problem is that im trying to install a wireless pci card into a packard bell desktop imedia tower but i cant take its case apart-any help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 131 Answers
Re: Cant take apart packard bell imedia to install pci...

When disassembling server chasis, you will have to release the front panel first, only then you can remove the side panel

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I just erased my whole memory because I got locked out and now my wireless won't work

If it is a laptop the build wireless network driver might not be installed yet and if it is a desktop the wireless card might not also be installed, could you provide me the model and brand of the wireless card or if it is a laptop, could your provide me the model and brand - usually found at the back of the laptop. Or if you do have a cd driver that is labeled as driver try to install it. If you are connected with the Internet Service Providers try contacting them.

Aug 28, 2011 | Modems

1 Answer

How do I hook up my DSL modem to my old computer? I have an HP Pavilion Samsung SyncMaster 750s DESKTOP PC. I need to access the internet on my PC but it doesn't have an ETHERNET JACK. I also no longer...

Which HP Pavilion do you have? The Samsung SyncMaster 750s is your monitor. What OS is it running?

Most desktops that came with Windows 95-XP have a few PCI slots inside the box. Computers with Windows 98 (some with Windows 95B) have USB ports. (Older computers may also have ISA slots inside the box.)

If you have a USB port, you can use a USB to ethernet adapter. This will be limited to the speed of your USB (not a good choice if you have USB 1.1). The wired versions are limited to 10/100 Mbs maximum internet speeds. There are some wireless versions as well. See for examples of wired adapters.

A better choice is the internal one. Again you need to check the specs for your computer and see if there are any available slots and the type on the motherboard. See HP support for the specs of the computer. Slim case formats often have few available slots. (You can usually remove the internal dial-up modem and replace it with the ethernet card.)

These are either wireless and wired. Some run at 1Gbs speed. You will also need a wireless router if you use a wireless card. (A router is a good idea even for a wired ethernet card. It provides protection against some internet problems.) A few PCI wired ethernet are available here: . Turn off the computer and unplug the wires to the computer. Open the case, remove the slot cover (or card that you will replace), push the new card into the slot and secure it. Then close the computer and connect your wires. Install the drivers (usually from a CD that will come with the card or by downloading from the manufacturer's site).Then plug an 8-wire RJ-45 cable into the jack and your broadband modem. Then set up following the directions for your ethernet system (dynamic (DHCP) or static IP address, etc). (Wireless networks you install the antenna for the card and then follow the setup instructions for your wireless router. This will include the password.)

I hope this helps.

Cindy Wells
(the exact setup will depend on the OS - see the control panel Add a network connection)

Feb 15, 2011 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

My wireless capability is turned off and i don't know how to turn it on.

Make sure the wireless switch on it is ON. Then press and hold "Fn" key and press "F5" (this enables/disables wireless capability of a computer) and try to detect wireless networks.

Oct 10, 2010 | Packard Bell (030083) Modem

1 Answer


Product ID 3409 Brand D-LINK Vendor Code DFM-562IS Description 56K V.92/V.90 Software-based PCI Modem
The DFM-562IS is a software modem card. It plugs into a PCI expansion bus slot of a desktop PC. It supports voice, fax and data transmission/reception. It's a high-performance CONEXANT-based modem card, and can be used to connect to the Internet, and for fax and voice communication.

Key Features
High speed External Data/Fax/Voice
Plug and Play Installation
ITU-T V.92/V.90/K56flex Auto Detect
Fax Mode up to 14400bps Transmission Rate
Technical Specifications
Data ITU-T V.90/V.92
ITU-T V.34, V.32bis, V.32, V.22bis, V.22
Bell 103 & 212A
V.44, V.42bis & MNP 5 (Data compression)
V.42bis & MNP2-4 (Error correction)
V.80 (H.324 video conferencing interface)

FAX V.17 (14400bps FAX)
V.29 (9600bps FAX)
V.27ter (4800bps FAX)

Voice With voice support via sound card application
System Requirements Requires CPU with MMX support
Operating Systems:
Windows 98,
Windows ME,
Windows 2000,
Windows NT 4.0,
Windows XP
Manufacturer D-LINK Warranty 2 Year Manufacturer's return to base Link D-LINK DFM-562IS Internal PCI 56K Voice/ Data Software Modem

May 03, 2010 | Modems

2 Answers

Hi ,I need to install a part into my Latitude d610[wireless]

You did not specify what you needed to install.

Here is the service manual for the D610 - should assist you with taking the entire laptop apart - if needed.

If you want to replace the wireless NIC, you will need to look at the section marked "Mini PCI Card".

These are good directions - as long as you follow all of them.

Nov 20, 2009 | Dell (Y8029) (0Y8029)

2 Answers

How can I connect my Pakard Bell 1998 model to the internet?

you cant connect wirelessly because it wasnt program that way.Dear we are in the 21st century try something new or you can connect via cable.

Jul 04, 2009 | Packard Bell (030083) Modem

1 Answer


You need to purchase a wireless router. The router will have 5 ports on the back, one in and 4 out. The wire that you have going from your modem to your computer will go to the "in" port on the router. The out ports can be used for wired connections, and the wireless antenna will connect to any wireless computers.

Any computer that you want to connect wirelessly to your new router will need to be wireless-ready. For a desktop computer, you will need to buy and install a wireless PCI network card. Most laptops have built-in wireless.

You can buy a wireless router at most "big box" stores, like Best Buy, Office Depot, even WalMart sometimes carries them. A wireless router will cost between $75 and $150.

Jan 09, 2009 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Laptop access to internet

you can check microsoft and see if vista is compatible with your router.. go to and look threw there.

Sep 26, 2008 | Linksys Modems

2 Answers

Cant seem to link my belkin wireless g+ notebook card to my router.

Windows XP or Vista:
1 Go to COntrol Panel
2 Administrator tools
3 Services
4 Right click WIreless Zero Config and select start
5 Exit back to desktop
6 BY the clock in the system tray right click the icon that looks like a monitor with green waves coming out
7 Select View Available Wireless NEtworks
8 DOuble click on one of the entries on this list

Jun 04, 2008 | RCA Thomson Digital Cable Modem (DCM305R)

Not finding what you are looking for?
Packard Bell (090317) Modem Logo

Related Topics:

1,330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Modems Experts


Level 3 Expert

18258 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

56797 Answers

Are you a Packard Bell Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides