Question about Mitsubishi LVP-X80U Multimedia Projector

1 Answer

Projector won't turn on

When I turn on our LVP-X80U the power and temp lights flash, and the lamp light stay solid but yellow instead of green. We do not have any repair centers in our rural community. Can I fix this?

Posted by on

  • tfpd Jan 03, 2008

    I read the manual. The error code says "abnormal" contact dealer. We don't have a dealer within 200 miles minimum.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 51 Answers

Have you checked the user manual to find out what this "error message" means?
You may need to replace the lamp.

Posted on Jan 03, 2008

  •  Nuno Barros
    Nuno Barros Jan 03, 2008

    Sorry but can't be more helpful. I couldn't find any service manual for this projector.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson 1925W projector has a brand new bulb but the lamp light flashes red. Power light is solid green and Temp is off


Reset the Lamp Hours, see if that helps. Also clean the filter and reset filter hours too

Nov 08, 2016 | Epson 1925W Projector

1 Answer

Sharp projector Bulb replaced but still won't work?


check the ballast

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Nov 08, 2012 | Sharp Projector Lamp For Xv-z90 Xv-z90e...

1 Answer

Optoma HD66 replaced lamp, LAMP WARNING light keeps flashing, still won't turn on?


i just had the same problem i took the top of the projector off and cleaned the color wheel and sensor seemed to have fixed the problem that is for now. seems to happen to me once a year on the dot but last time it was warranty. good luck hope it helps.

Mar 17, 2012 | Optoma Office Equipment & Supplies

2 Answers

Benq w1000 project not turning on


Look at the manual page 34, for the indicator messages. I suspect it's the same problem I have (which I haven't had formally diagnosed yet!), which I believe is a defective fan. My projector had been making a really loud noise on startup, which varied in length and volume. Recently the projector has taken to turning itself off after being on for about a minute, and the power light flashes green, with the temp and lamp lights flashing red.

Jan 27, 2012 | BenQ W10000 Projector

1 Answer

Projector will not project light (Mitsubishi LVP-X80U) LCD Proje.


Hello toma_leonard,

First check your lamp to make sure it is seated properly in the socket.
Then check all of your interlocks (see your manual for locations), these are usually located on any hatches or doors that allow access to the lamp and or fan area. Once you check your interlocks make sure the filter and fan area is clear of dust, (some projectors have air flow sensors), and the recheck the interlocks. Once this is done , If the interlocks are not broken, or the lamp fuse blown, the projector should be working. If not it is the lamp that needs changing.

I know this may be expensive, however these lamps do go bad, as much as we wish they would not.

If you still feel it is not the lamp, have a technician check the voltage levels to the lamp and the levels of the control board circuitry.

I hope this helps,

Thank you,

Shuttle83

Nov 20, 2008 | Mitsubishi LVP-X80U Multimedia Projector

2 Answers

Projector


A couple of things...

If the fan is not working, the lamp will not fire. If you have the owner's manual, it should indicate what the flashing lights mean. Check to make sure that the panels are seated properly. When you replaced the lamp, the outer cover was removed. If that is not seated back 100%, the unit will not work. There are a number of safety "checks" built into the unit to prevent damage and possibly fire as the lamps get really hot.

Check the items above and let us know your progress.

Dan

Jun 19, 2008 | Dell 2300MP Multimedia Projector

1 Answer

Blinking lights


it means abnormal operation contact with service center asking help.

Feb 25, 2008 | Mitsubishi LVP-X70U Multimedia Projector

Not finding what you are looking for?
Mitsubishi LVP-X80U Multimedia Projector Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75304 Answers

Are you a Mitsubishi Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...