Question about Sanyo DS27510 27" TV

1 Answer

Screen does not stay clear

When you put the tv on, it looks like the cable might be out, then the pictures gets clear for about 10 seconds then acts flippy again. My other tv's in my home work fine. Your thoughts

Posted by on

  • nannielee Jan 03, 2008

    model # DS25390 / I just tried it again, now the channels are going crazy. I think the it is about 7-8 years old.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

How old is this TV?
My experiance is to not put money into a TV that is over ten years old. TVs stress out their electronic components worse than almost any other electronic product. After 10 years, there are so many parts that are ready to fail that your are probably wasting your money trying to get any more life out of it.
Be careful on buying a new one though. Often times, these new technology ones are much worse. Always Google the model number of the set you intend to buy and add the word 'repair' or 'complaint' to see if it is one of the many models that are customer service nightmares being produced by even the most reputable companies today.
Hope ya fix it!

Posted on Jan 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung LN-T4071F picture starts clear, then gets grainy as the TV stay on.


I have samsung TV 40 inches flat screen comes on the picture ok but within 10 minutes the picture goes black and white

Jan 20, 2013 | Samsung LN-T4061F 40 in. LCD HDTV

1 Answer

No picture on intermittent basis -


If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service.

Aug 27, 2012 | Vizio GV47LF Television

1 Answer

My Samsung HC-p4363w have no pic or sound but the power red light is on


Try pushing the "source" button on remote or on the TV. Wait about 5 seconds, if no picture, push again. Do this at least 6 times or until you get a picture. With each push, the TV will look for cable input, dvd input, etc. until it finds your cable signal.

Also make sure your cable/antenna is hooked up and working.

If that doesn't work, hold down the "enter" button for 10 seconds to reset the tv to original factory settings. Then follow the on-screen menu setup instructions.

-please rate me. Thanks and good luck.

Nov 20, 2009 | Samsung HC-P4363W 43 in. TV/DVD Combo

1 Answer

What can I do to fix the flipping of the screen from snow to prog


the tuner is getting a weak signal and that is why the vertical sync signal is weak and the picture is rolling .check the cable on the back

May 23, 2009 | Samsung Televison & Video

2 Answers

Sony Vega Screen Goes Black and then back to normal picture


Hi There,
Does it seem to be staying black longer? Are there any unusual sounds associated with it?

Mar 27, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

3 Answers

New JVC flat screen cuts off 10 sec. after cutting on


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

Mar 26, 2009 | JVC LT42P789 42 in. LCD TV

1 Answer

Toshiba 32'" tv wont give sharp picture


no rocket science here - my son fiddled with the cable cord attachment, until presto, the screen became sharp. Then we moved away as fast as possible, lest we shifted it and it put us back at square one.!!

Jan 26, 2009 | Toshiba 36A50 36" TV

1 Answer

P50 VIZIO WHEN ON HDTV I GET SNOW


it's probably the Time Warner cable box that have issue and not the TV. Try using a DVD player and test the same input, it should work fine.

Nov 15, 2008 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Image gets pixelated and a black screen flashes


yes its a cable box problem, find the channel you are having more problems with,press guide in the cable box remote and you will see how the box where the video is will still have the problem and the guide with channels info its going to be clean,
100% weak signal
hdtvman

Jun 22, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

4 Answers

Lightning strike


press menu and input both in together on the front of the TV and hold them both in together for 8 seconds then let me know if the LED blinks a two digit code.

Jun 10, 2008 | Mitsubishi WS-55315 55" Rear Projection...

Not finding what you are looking for?
Sanyo DS27510 27" TV Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5444 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...