Question about Zyxel Prestige P-330W Wireless Router (P330W)

3 Answers

Can't access 192.168.10.1 Access Denied

I cannot access the 192.168.10.1 to be able to configure my router. I didn't change the default password 1234 but i wasn't able to connect to the website. Is there any chance to reset the password? thanks...

Posted by on

  • 4 more comments 
  • Anonymous Feb 24, 2008

    i have connected my new modem with the wires and made sure my computer can configure the ip address but when i try to log onto te site given and enter the password 1234 it does not load it just stays on the enter page. Help!

  • Anonymous Apr 04, 2008

    i canot enter the router when i'm givin 1234 as pw, it sas wrong pass but i havent changed the pass

  • Loklindt Apr 30, 2008

    I need to find out how to get on the ZyXEL Prestige Router , but i don't know my password . i have tryed Admin and 1234 and 4321 , but nothing works.... please HELP ME !!!

  • mayleen2785 Oct 09, 2008

    i have new internet serv and im trying to connect but is not working

  • Anonymous Nov 29, 2008

    Yes I do have the same roblem

    Can't access 192.168.10.1 Access Denied problem

  • Dave117
    Dave117 May 11, 2010

    posted by MyBU on Jan 03, 2008


    I cannot access the 192.168.10.1 to be able to configure my router. I didn't change the default password 1234 but i wasn't able to connect to the website. Is there any chance to reset the password? thanks...



    There are instructions for other models where the web IP address is 192.168.1.1 - Not 10.1 - Are you sure you have the correct IP? And the instruction book says use the reset button on the back of the router.. Usually you hold it in, then turn the power on (holding the button in) until the router has fully powered up.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Yeah mine has done the excact same thing, isnt alowing me to go pasted the first page for the IP of 192.168.1.1.

Posted on Jan 25, 2008

  • Alan Mills Oct 24, 2011

    IPconfig /all will tell you what your default gateway address is.. Go to run...CMD.... and then Ipconfig /all

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi does anyone know how to reset motorola 850g.i need to setup WEP/WPA security but can not access the admin page, i forgot my admin password. i tried resetting the router but nothing works. i use to have a belkin and it was so easy just reset and there you go. motorola has to make it so hard. someone please help.

Posted on Feb 16, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 556 Answers

You man need to get Adobe Reader (free) to read the manual
If needed, click Get Adobe Reader button on the following link
http://www.adobe.com

See page 21 of the manual to reset the router

http://us.zyxel.com/upload/download_library/P330W_UG_V_1%201(3).pdf

Posted on Jan 03, 2008

  • david Jan 03, 2008


    You may want to assure you set the administrator password to something other than 1234 in the future so no one else can configure your router. That MAY be the reason you have no access now.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I could access the router log in page and then go to the status page but I cannot go to the advanced setup page. I would like to know the setup page address that should be like...


For user access enter the default user password user to view the status only. The
following window will appear.

Administrator Access

1 For administrator access enter the default admin password 1234 to configure the wizards
and the advanced features.
2 Click Login to proceed to a screen asking you to change your password or click Cancel
to revert to the default password.
3 If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to
confirm and click Apply. Alternatively click Ignore to proceed to the main menu if you
do not want to change the password now.

This router has a user password to see the status and an administrator password to change settings. Please mark this as solved if this solves your problem. If not feel free to ask more questions :).

Mar 02, 2011 | Zyxel P660HW-D1 Router

Tip

How do I access my Router OR Cable Modem admin configuration panel ?


Cable Modem: 192.168.100.1
Username : root
Password : root (this is the default and can be changed under the TOOLS menu on the right-hand side)

e4fc832.jpg

Wireless Router:

192.168.0.1 or 192.168.1.1 ( also www.mittip.com)

Username : admin
Password : admin OR 1234 ( (this is the default and can be changed)

29abd54.jpg

If this fails consult http://www.routerpasswords.com/ for your specific 3rd party router model

on Jan 23, 2010 | Computers & Internet

3 Answers

I just installed my new netgear router and i have the hardtime to get a username and password..what is the best way to fix this problem


Hi,
Default settings will be as mentioned below....
IP address:
//192.168.1.1
Username: admin
Passsword: password


Thanks,
Satheesh

Jan 27, 2011 | Computers & Internet

1 Answer

How do i change the password for my belkin router


First access your router.First connect your router to computer with ethernet lan cable.
You can access your router with following default link.
http;//192.168.1.1
or
http://192.168.0.1
or
http://192.168.2.1
or
http://192.168.15.1
Type user as "admin" and password as "admin" or blank or "password" or "1234" then you can see configuration page of router.
If you are not able to access it with above ip then check your Gateway ip in network adapter property gateway ip is your router ip.
Then in configuration page make sure wifi is enable .
.
Check WEP security and add new code because old code is in * or # format add new code then save settings and restart router.
Then you can connect with that code.

Let me know if you need further assistance.
Thanks for using FixYa.

Apr 01, 2010 | Belkin (F5D7230-4) Router (587009)

4 Answers

Can't access 192.168.1.1


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.
Reset for most routers with a reset button on the rear panel
Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
Or you will need to update the firmware to rest the router.

Nov 08, 2009 | NetGear RP614 Router

2 Answers

Forgot my password


Hi,

Most of the NETGEAR devices have the following default username and password except ReadyNAS products and Fully Managed switches:
  • Username is always admin
  • Password is password or (for older devices) 1234
If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sep 26, 2009 | NetGear RangeMax WPN824 Router

3 Answers

Even after doing a hard reset on a zyxel eq-660r router/modem the stupid 1234 password won't work.I s there another way of getting into the router to change configuration?


Go to the manufacturer's webpage - the password may be incorrect for your router. Try another hard reset if the password is confirmed; software is fallible (just look at computers!).

Sep 08, 2009 | Zyxel Computers & Internet

1 Answer

Router configuration password


you can access your router with folowing link

http://192.168.1.1
or
http://192.168.0.1

type suername as "admin" and password is "admin" or blank or "password"

thern you can enter in router configuration then go to wi fi if you set encryption security there then check it is your wi fi security poasword.

Jun 26, 2009 | Zyxel Prestige 660R Router (P660R)

3 Answers

I cant acces to 192.168.2.1


If I'm not mistaken, you can't get to the user name password page unless you have already accessed the edimax setup page after typing 192.628.2.1, thus the solutions provided by some of our friends might not be of help.

Jan 09, 2009 | Edimax BR-6104K Router (br6104k)

1 Answer

I cant access my router(EDIMAX BROADBAND ROUTER)


Warning the following instructions are likely to RESET THE ENTIRE CONFIGURATION OF THE ROUTER and you will need to reenter it completely. Do not follow these instructions unless you are prepared to reconfigure your router completely from the factory defaults. I am not sure but be careful or consult with EDIMAX support before proceeding.


note the following is from the http://www.edimax.us/ website follow technical support and click

BR-6104 / 6104W / 6104P

Then

If I forget my password, what can I do?

I hope this helps.

Dec 02, 2007 | Edimax BR-6104KP Router (BR6104KP)

Not finding what you are looking for?
Zyxel Prestige P-330W Wireless Router (P330W) Logo

15,833 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

mark

Level 2 Expert

108 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...