I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help.
f.y.i
I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I just hope to get the camera to remember the settings once the camera is turn off. Its like someone lock the camera to a preset settings and every time the camera is turn off, resets itself
try to follow the route up the circuit from the battery on the motherboard.maybe the battery is ok but the power not rich to the mother board or memory chip.take more attention on the connectors.
Was this helpful?
Yes
No
Popular Solutions for Canon PowerShot SD630 Digital
Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
Hi Merry XMas! I have a problem with my camera lately and it seems like a software problem not sure....
(More)
Hi Merry XMas! I have a problem with my camera lately and it seems like a software problem not sure. When I take a picture, there are horizontal lines in the picture, the colours are yellowish and the flash is not working properly (shadow in the upper or lower part of the picture). I have reset the functionalities to default; it worked somehow but the problem came back after a few pictures. Can you help?
I was taking pictures when I noticed that the batteries were low so I took them out to charge them. ...
(More)
I was taking pictures when I noticed that the batteries were low so I took them out to charge them. Afterward, I placed it back in the camera, but there's this red light by where the memory card is that would not turn off, and the camera will not power on. The red light goes off if I take the memory card out, but the camera still will not power on. What's wrong with it? What can I do?
This camera Cannon Powershot SD360 fell off a low chair. The camera will not turn on. There is no...
(More)
This camera Cannon Powershot SD360 fell off a low chair. The camera will not turn on. There is no noise, nothing will come on - the lense is in. I've tried taking out the battery & and photo card and reinserting them -- it still doesn't work. The battery is charged. Is there anything I can do to fix it?