The clock/temp gauge has suddenly quit working on 2001 camry

Most likely the motor failed-LIsten for any sound-If you here sound then the regulator failed-if not the motor dumped-GL

Check the fuse panel first. Has anyone been under the dash recently, sounds like a harness plug is not quite home.

For oil not working check the help link shown below:-----

Oil Gauge and Temp Gauge Not Working?

http://howtobyme.blogspot.in/2012/05/2004-toyota-tundra-oil-gauge-and-temp.html
=======
Hope these helps .

check the fuses in your manual it will tell you which fuses are for the dash and replace them it sounds to me like they are blown! good luck

REPLACE BUSTED FUSES

This is a very common problem with many of the mid 90 - 2000 era import vehicles. The clock modules are very prone to internal failure. I offer a reasonable repair service with a lifetime guarantee, check it out: www.autoclockrepair.com
There is a bunch of useful info there. Drop me an email if you have questions, thanks!

clock fuses left kick panel

chances are the capacitor for the lcd has burned out and will require a new clock

Raincity here, I discovered I was checking the wrong fuse. Got it working, fuse blown. The fuse is under the dash behind the little pocked to the left of the steering wheel. Good luck.

Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader.