An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: problem to take a photo
Do you mean that you can see the image on the screen of your camera, but when you click on the photo button, it doesn't actually take the picture?
I would first check your batteries - it sounds like there is a chance that your batteries do not have enough power to take the photo. Many people do not realize what little battery hogs digital cameras really are! They do not work well with rechargables in my experience, and go through regular alkaline batteries very fast.
Try replacing your batteries (and making sure they are in correctly), and try again. Also check for a build up of dirt or oils around the photo button. This is common too - we grab the camera and have food on our hands, or even soap, or regular good ol' dirt! ha! Just sitting out can get household dust and pet hairs on/in them too - be sure to see if it looks clean, or could use a little de-gunking around the button.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wide screen monitor distortionDepending upon the screen resolution that has been set inDisplay, the image will be distorted on these large wide screen monitors. Create a large circle image using a draw program such as Paint (hold down theShift key as you create the circle as it will draw a perfect circle). Open Control Panel - Display - Settings tab and adjust the Screen resolutionslider, increase or decrease the screen resolution then bring the circle imageto the front and check the image, if the circle is still distorted then changethe screen resolution and check the circle again until you are satisfied withthe image of the circle. When you are satisfied then click apply.
Hello lalandavis, regarding on your problem please check first your yahoo messenger if you have already uploaded your image/picture. then if you don't have upload yet please upload your image/picture in YM top view your photos in Ym. Otherwise if you have already done uploading then make sure you have click the share my picture in order for your photo/image to be visible in your YM. You can view you display image by clicking your picture and click the small arrow below the image or press "Ctrl + Shft + F8" buttons at once to view the display image tab.
Click the "disp" button. The display of the camera has been turned off in the LCD screen but you can still use the viewfinder, this functionality is just for those who prefer to use the viewfinder instead of the LCD screen.
To change your display image on yahoo messenger follow these steps: Login to your messenger, At the top left corner is an icon which looks like a face directly under the messenger tab of the messenger, Click on the face icon, An extension comes out with manage display image, click on display image and decide if you want to share an image or not as well as change whatever display image shows there. Hope this is helpful
Hi, It sounds bad ccd image chip in your Canon A95 camera and ccd imager chip will be replaced to get correct live view in camera mode. Canon offers free of cost repair for said problem, click Canon CCD Imager Advisory for details. Thanks.
lacking the expensive adobe acrobat (not the reader) .. then they make it hard to do .. but here is a simple way .. display the photo you want as large as possible on the screen ... then push the "PRN SCR" button (print screen) .. now an image of the whole screen is in the "copy buffer" (clipboard) .. now open any photo editor (if you dont have one you can use "microsoft Paint" , that comes with windows) click on "paste" now you have that screen image as a picture ... you can use the magnifier to display the image bigger or smaller (alt click makes it smaller) .. then in paint you select the portion of the picture you want to keep (selection tools) then click on "crop" now save that as a JPG or other file format that is supported .. now you have a JPG of the image that was in the PDF ... the resolution of the final result depends on how big you were able to make the object before you pushed "PRN SCR" it will look just like what you see on the screen ... you can also paste into Microsoft Word if you have that .. Gimp is a really nice Free photo editor if you are willing to learn a lot .. it will take a while to get into but is worth while .. does a nice job for things like this ..
good day! you mean that you no longer can''t hear any start up sound every time you are turning on your gadget? you try clicking on the settings if there is because there are some instances that the tune is muted. in regards with the blank screen photo, there might be something that is obscuring the image screen. for more inquiry, please keep me in touch. thank you!
When sending photos as e-mail attachments, the image (file) size should not be too large. Use the included image viewing program called Image Expert to save photos in reduced size. For instructions on installing Image Expert, see "Installing the image viewing program" on page 42 of the Instruction Manual.
1. Launch Image Expert.
2. Choose "Open Image" from the "File" menu.
3. Specify the image you want to reduce, then click "Open".
If the camera is connected using the USB cable, it is displayed as a removable disc. images on the camera can be opened directly by specifying the remove-able disc.
4. Click on "Change Size" in the "Image" menu.
5. Input values at "Width" and "Height", then click "OK". If "Keep Aspect Ratio" is checked, the size is changed without changing the image’s vertical:horizontal ratio.
6. The image is displayed at its new size.
7. Click on "Save As" in the "File" menu to save the image with the new size.