Question about Logitech LX 710 Keyboard/Mouse

4 Answers

Mouse problems I cannot get any mouse to work on my computer. I have tried two different cordless Logitech's - the M/N: M-RR95  (93LP0005) and the M/N: M-RBQ1244.1v, a Microsoft corded mouse, and I have tried the Rocketfish and the Targus wireless. Nothing! I am having to go back to barely remembered keyboard commands to navigate. I went into device manager and deleted the drivers thinking that Windows would recognize new hardware - but no luck. It is too much to think that all of these mouses are defective so it must be in my hardware or programing. What do I do next? I can use a mouse with LogMeIn, which doesn't make sense to me at all. Any help would be much appreciated.

Posted by on

  • ContraryMD Jan 05, 2008

    My son's USB trackball worked, but I am still curious as to why the corded mouses (one Dell & one Microsoft) did not work. None of the wireless ones worked even though the Logitech keyboard worked. I did try deleting the drivers out of device manager - that didn't work, so I tried a restore point of three weeks ago. That didn't work either. I will try these mouses (mice?) on another computer and if they still don't work, I will just trash them. Thank you so much for your help, Darklord1. ContraryMD

  • Anonymous Jan 05, 2008

    Ge wireless mouse 98763 not working with any of my laptops. Cannot find corresponding driver in the web. Need assistance.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

OMG Trw 313 YOU da man ! Solution # WORKS ! Fa shizzel I've been looking around for a long time trying to solve this problem and this was it ! Wow, thanks again....

Posted on Jun 08, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Its probably not the ports. It doesnt recognize the driver. Dont use the automated driver loading. Use the manual and direct to Windows/.inf file type. It will find the correct driver After deleting and rebooting for 3 days to find the right driver I discovered this to work and load the correct driver otherwise you will be on an endless loop looking for the correct driver

Posted on May 12, 2008

Ad

I have a Targus PAWM10U Mouse. It was working fine but now it is not. I recharged it. Turn off the computer and turned it back on but nothing works. Can you help me?

Posted on Jan 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

If you only tried ps2 mouse's then try a usb mouse.

If no mouses work what so ever then you will need to
1.) restore to a previous date when it was working

or if the registery is corrupted beytond restore to solve the problem

its a virus and you need to format and reinstallwindws to solve the problem.

Posted on Jan 03, 2008

  • Rishi Roshan Ali Jan 05, 2008

    The ports on your board may be damaged unfortunately



    If the usb works i suggest you use that



    i dont see any need to replace a board when it can still be used until it is dead.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Logitech mouse frozen up we changed batterys in


If the mouse is freezing up though the batteries are fully charged, here's what you need to do:

1. Try to use different batteries just to make sure that it's not a power issue.
2. Connect the wireless USB dongle into different USB ports of the computer.
3. Try to connect the USB dongle in different computer and try to use the mouse (to make sure that it's not a computer issue).
4. Make sure that there's no cordless phone, cell phone and other wireless devices that might interfere the wireless signal.

The Logitech wireless mouse is running on 2.4MHz frequency, same frequency as the other wireless devices. Any wireless device might cause the mouse to freeze.

If same problem occur, then it's a hardware problem. Contact Logitech and RMA the mouse.

Thank you and good luck!

Apr 18, 2010 | Logitech Cordless Mouse

1 Answer

I have a logitech cordless mouse that plugs a usb device into the usb port for it to work. I've been reading through solutions to fix problems with these mice and most of them say that the usb device was a...


If its a logitech look at the model number of the mouse your using go to logitech.com support type in your model number and download the logitech software for your specific os and mouse. You'll notice a big difference compared to just having the drivers installed.

Jan 05, 2010 | Logitech Cordless Mouse

1 Answer

I have Logitech MX cordless mouse that no longer works. battery is charged and USB receiver is in computer


try to check your device manager and check if your mouse is running.
try to check your setpoint.
try to use your mouse on a different computer.

Sep 29, 2009 | Logitech Cordless Mouse

1 Answer

My cordless mouse quit working. I think it might


The battery is located under the place you put your palm. You need to grasp that piece from the top and pull back to disengage it from the rest of the mouse. I think it might take won AA battery, but I'm not sure

Sep 24, 2009 | Logitech Cordless Mouse

1 Answer

My MX1100 cordless mouse no longer recognized


It sounds like the Drivers for the Mouse aren't be installed. Since it is a wireless mouse and receiver it will need separate drivers to function properly. If it came with a CD I would try re-installing any software that came on the disc. If not (I'm assuming its a Logitech Mouse here) I would visit the Logitech website (www.logitech.com) and see if you can locate Drivers there.

Jul 08, 2009 | Computers & Internet

1 Answer

Logitech V220 Cardless Optical Mouse is not working


As long as you have installed the mouse driver, you have done everything possible ... the mouse is faulty.

Jun 25, 2009 | Logitech Cordless Mouse

1 Answer

Can't get acer desktop to recognize logitech cordless mouse


Yes, you need to install the Logitech transmitter for your cordless mouse. The acer transmitter uses a different frequency. You could try pressing the connect button on both the existing transmitter and mouse but that's not likely to work with different manufacturers.

Apr 20, 2009 | Acer Aspire T690 (AST690UP820A) PC...

2 Answers

Logitech V220 cordless mouse won't work


The V220 is a quite nice rodent, my favorite. Check 3 things.

1) Is the battery facing the right way? Minus end goes in first. Green LED should turn on for a few seconds after the battery is installed.

2) Is the mouse ON? The switch under the mouse is supposed to turn on automatically when the receiver is removed. This does not always work.

3) Unplug the USB Receiver. Connect it to a different USB port. Run the Logitech Connect utility.

If the mouse still does not work, uninstall the Setpoint software and reboot. It is possible that the driver did not install correctly. After reboot, try Step 3 again.

Setpoint software is only needed if you want to use the wheel click or horizonal scroll features.

If all else fails, try installing your V220 on a different computer.

Mar 01, 2009 | Logitech Cordless Mouse

2 Answers

Logitech Mouse V320 Corless Optical Mouse not working


The warrenty period is usually a year. Is there a connection button on the receiver as well? Normally you need to press the connect button on the mouse, and then on the receiver shortly there after. If you want to replace it, you might have an easier time just getting a new mouse.

Jan 25, 2009 | Logitech Cordless Mouse

1 Answer

LOGITECH KEYBOARD AND MOUSE


Gken, assuming your new mouse and keyboard are USB go into the BIOS of your PC and check if USB mouse and USB keyboard are enabled. If not, enable them, that would fix the problem.

kiratae, have you tried using XP drivers for that mouse? According to logitech the v220 is certified for vista, did you plug in the little USB receiver?

May 30, 2008 | Logitech Cordless Mouse

Not finding what you are looking for?
Logitech LX 710 Keyboard/Mouse Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2992 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...