- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
a flashing light , if located on the top of a wireless mouse indicates that the battery is low and needs replaced. the other possability may be it lost its connection with the usb fob and you need to press the connect button located on the bottom of the device.
Generally any mouse should be taken apart and cleaned every year. My first encounter of a frozen mouse was years ago. I had opened it up and found so much dust and residue inside of it I had to brush it out first before blowing it out with compressed air. Use a spray bottle that is dry and empty to blow it with. Have a terry cloth below the area you will direct the air pressure to incase something such as the thumb wheel falls out. I recommend that all loose parts are taken out before cleaning. Draw a scetch if needed how to reassemble the mouse. A digital camera works best taking photos as you take it apart
The red light is connectivity to the dongle on the PC.
Check your mouse settings in Windows for the left mouse button settings.
Does the mouse move on the screen?
You can try reversing the mouse buttons to see if the button is defective. If you swap the buttons and now right mouse clicks do not work, the button is defective.
Push the button on the receiver first, wait until it starts flashing and then push the button on the mouse. If that doesn't work, go to device manager and scroll down to your mouse and uninstall it, but choose to keep the drivers. Reboot the computer and let it find the hardware and load the drivers for it. If the mouse doesn't work during this, you can use the keyboard for your input commands by using the tab and space bar to move.
Hi there. Some wireless mice seem to go into some kind of sleep mode, in other words if you leave them for an amount of time they disconnect, the way to reconnect is to right click while moving the mouse. Also check to make sure that the batteries in the mouse are seated properly.
First are the batteries good?
Turn the mouse over and find the small rest/connect button
on the bottom of the mouse and press it. This should connect the mouse to
the receiver and work properly. If not, try pressing the receiver button
and then press the button on the mouse. This should be done whenever you
change batteries or glitch. Hope this helps you. Bud
Press the Receiver button (and the lights will start
Then if the Keyboard isn't working, press the small RESET/CONNECT
button on the back of the board to connect the keyboard to the
If the MOUSE isn’t working, push the small RESET/CONNECT button
on the back of the mouse to connect to the receiver. Then they
should work okay.
Hope this helps. Bud