Question about Whirlpool 24 in. DU1050SS Built-in Dishwasher

1 Answer

Whirlpool d/w is stuck on wash cycle

Whirlpool quiet partner d/w is stuck on wash cycle. it just keeps on running on this cycle.

Posted by on

  • 4 more comments 
  • pj249 Mar 16, 2008

    My dishwasher is only 2 years old . It has been running in the wash cycle and not going through any other cycle. The heat seems to be fine.

  • mh333369 Aug 06, 2008

    same thing with mine. it just keeps washing and never turns off. we have to turn it off manually and the water is steaming hot. whirlpool ingles is what we own

  • jcb305 Dec 15, 2008

    Its stuck on wash cycle. it just keeps running on wash and wont rinse and dry. What do I do?

  • uskswg01 Jan 16, 2009

    Dishwasher will run through wash cycle but wont move on to final cycles. It leaves about 2 inches of hot water in the bottom of the machine. I had a repair tech look at it and he "guessed" that the computer was going bad and that I'd be better to replace the d/w for the cost... I wasn't convinced by his diagnosis... he didn't seem confident and I hate to replace it if it can be repaired for a reasonable cost.

  • Anonymous Mar 15, 2014

    Normal wash begins and gets to a point in the cycle where it just stops

  • Anonymous Mar 19, 2014

    noisy, grinding noise as it runs. any suggestions

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers

Is it filling and emptying at the same time???? If not could be a heat problem. How long do you leave it running for?

Posted on Jan 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Long running wash cycle for whirlpool quiet partner 2


Hi there
The quickest wash cycle is the "1 Hour Wash" and is 58 Minutes long, but if your incoming water is below 120 deg. F or 49 deg. C you are looking at approx. 1H20 min.
Regards
Phillip

Mar 28, 2015 | Whirlpool Dishwashers

2 Answers

Whirpool dishwasher quiet partner 2 clean light blinking wont cancel or run a cycle


Hello,

press normal heated dryer normal heated dry normal the dishwasher should reset and start. You will need to check the heater this happens because the heater normally fails. Let me know,

http://www.appliancerepairlesson.com/

Mar 07, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Dishwasher takes 3 hours to wash, even on the light cycle


whirlpool Quiet partner 3 the clean light is flashing 7 times what does this mean

Mar 12, 2010 | Whirlpool Dishwashers

1 Answer

I have a whirlpool Quiet partner II. It will not fill w/water.


ck the float in bottom of tank . it may be stuck n the up pos .. moce it up and down and listen for click of the sw .. very common . also the water valve may have failed and it will need replaceing . mm

Dec 07, 2009 | Washing Machines

1 Answer

My Whirlpool quiet partner dishwasher seems to run


try a large cresent wrenck,or channel lock plier.ps.might place towel over plastic nut,to protect from wrench damage.

Oct 10, 2009 | Dishwashers

1 Answer

RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS


common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere.

Mar 22, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Quiet Partner II not washing or sensing.


I have a whirlpool quiet partner II and for some reason it does not drain the water out any more and I cannot figure out why....people say that it is the filter but that is unbelievably hard to get to and I cannot find any instructions online or paper work that tells how to break it down. If anyone has any insight please let me know

Nov 16, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Whirlpool Quiet Partner Doesn't finish cycle


FIX YA IS A JOKE I WOULD LIKE TO BURY THE ************** WHO CREATED IT!

Jul 30, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool 24 in. DU1050SS Built-in Dishwasher Logo

1,323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Mike

Level 3 Expert

4348 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...