Question about Wharfedale DVD-M3 DVD Player

2 Answers

Wharfedale dvdrhd400 problems

HI, I HAVE THIS WHARFEDALE dvdhd400 . WHEN SWICHT ON , I DO NOT GET A PICTURE , JUST SOME BLACK LINES . I DO GET THE SOUND OK .EVERYTHING ELSE SIME FINE. REGARDS. ADRIAN

Posted by on

  • Allan Kendrick Oct 14, 2008

    1.used low power to save electricity and turned off power in evening, after a few weeks my Wharfedale DVDRHD400 reset clock itself.

    2. no sound even when recording

    3. looked in setup and turned on progressive in frustration.Whoops no picture.

    4. Tried clear, clear, 6 (from manual) nothing happened

    5. overnight switchoff. Have now got sound but no picture, just a faint vertical black line on screen.

    6. tested tv / cables

    Still no picture - unit about 6 months old

    Please Help If You Can Regards Allan

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Posted by msladsy on Dec 21, 2007
Report abuse


When the initial set up ran for the DVD recorder it set the correct time and, I assume, the correct date.
However, I had problems with the display and went through various settings until I solved the display problem.
Unfortunately, during the process, which included disconnecting the power, the clock was reset, starting at midnight and 1st January. There appears to be no way to access the clock.
How do I get the recorder to display the correct date/time?

Mark

Comment by msladsy, posted on Dec 21, 2007

This solution may work for other Wharfedale DVD recorders as well as the DVDRHD400F.
Use your Setup button to acces the 'Setup' menu.
Choose the 'Preferences' menu.
Choose 'Factory Defaults' and click on 'OK'.
The recorder will restore the factory defaults and the first screen it takes you too is the 'Initial Setup' screen where it asks you to enter the correct date and time.

Mark

Comment by msladsy, posted on Dec 22, 2007

May work on similar dvd recorders. Would help if Wharfedale included this in their users manual.

Posted on Jan 28, 2008

Ad

Change the Scart setting (in the setup menu) from the default setting (RGB) to the other available setting (CVSC?).
I have a problem with my box restting the clock on a random basis, making it impossible to set a timer to record anything - let us know if you get the same problem via this site!

Posted on Jan 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wharfedale tv


That sounds like the backlight is switching off. It might be faulty. If this is the case the screen still shows a picture but it's not lit, all black.

May 09, 2014 | Televison & Video

1 Answer

I just brought some wharfedale one-three speakers and have them hooked up as the rear speakers. Can i get the sub to play still and do i hook the speaker wires in the top or bottom?


Do you mean "Modus 13"?

See picture 6...

http://www.freeads.co.uk/uk/av/audio/hi-fi/speakers/8402337/wharfedale-modus-one-three-speakers-black-rare-bi-wire-quality/view

Put the jumpers back in as shown. Hook your speaker leads to either top or bottom. The entire array of drivers will be active.

Make your receiver aware they are LARGE for the purposes of bass reproduction so some bass will get out to them. FYI, many AVR's will only allow Large Rear speaker selection if you also have Large Fronts. Refer to the manual(s).



Mar 07, 2011 | Wharfedale Diamond 8.4 Main / Stereo...

1 Answer

I have recorded a film and want to remove the adverts but i can't work out how to segment. It is the wharfedale DVDRHD400


Scan the DVDR with TMPGEnc v4.0 Xpress this way you can cut clip to you hearts content.

Jan 11, 2010 | Televison & Video

1 Answer

Wharfedale 80GB DVD HDD Recorder DVDRHD400 USER


remote not operating, unit working otherwise, h/d not full, dvd's play ok

Oct 26, 2009 | Televison & Video

1 Answer

Progresive scan problem and didn't get picture in tv


Our problem was that we could not get picture on the tv screen but it got sound.We tried to solve it using different techniques like the setup,video source,function keys pressed on remote control by trial(only assumed) and error as we could not see the screen and I used scart with every conection but three point pin was free so I put only one pin in video out put and at that moment I could see the picture on tv.

Jan 30, 2009 | Wharfedale DVD-M3 DVD Player

2 Answers

WHARFEDALE DVDRHD400


when you have split and seperated the part of the viceo you want to put onto a dvd, highlight it on the list of recordings and press the blue "playlist +" button on the remote. This will have added the recording onto the list of items to be recorded to dvd. Now press the red "RECORD/DUB" button. This will then record the file to the disc.

When y ou are notified that the process is complete,you will need to finalise the disc in order for it to be playable on other machines.
While the DVD is still in the drive uses the blue "function" button, and select DVD.
Shortly a list of titles on the DVD you have recorded will appear. Press the "UP" arrow on the remote once and a new menu will appear. One of the options here is to finalize disc. hilght this option and click the "RIGHT" arrow once - press "select" to finalise the disc.

Aug 30, 2008 | Wharfedale DVD-M3 DVD Player

1 Answer

Wharfedale DVDRHD400


where can i get a remote for the wharfdale dvdr hd400

Jan 15, 2008 | Wharfedale DVD-M3 DVD Player

3 Answers

Error code


I had the same problem - turn off at the wall and on again fixed it.

Dec 07, 2007 | Wharfedale DVD-M3 DVD Player

2 Answers

Wharfedale DVDRHD400 Set up Issue


Hi I had the same problem. The answer is to use a scart lead on the freeview box and connect it to the input/output scart on the DVD. Then connect a scart lead from the TV out on the DVD to the TV. You then press Video source on the DVD remote until 'scart' is displayed to pick the freeview channels. Hope that helps

Jun 25, 2007 | Wharfedale DVD-M3 DVD Player

Not finding what you are looking for?
Wharfedale DVD-M3 DVD Player Logo

4,532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale Televison & Video Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Wharfedale Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...