Question about NexxTech 4-Port Ethernet Broadband Router (N4PROUTER)

1 Answer

My n4prouter set up

Hi i just bought this router today for my home and i cant get internet, i do everything the instructions ask for. also the site would nto work for me, do you have any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 94 Answers
Re: my n4prouter set up

Connect a computer to the router via Ethernet cable, then you should be able to log into the router to set it up by opening a web browser and putting "" or "" (without the quotes) into the address line. The default username and password is usually "admin" and "admin" or username "admin" with no password. From there you should be able to configure the router and retrieve or change the WEP key.

Let us know how you make out.

Posted on Jan 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi, I purchased Trendnet TEW-651br today and set up the connection. Everything seemed to be working fine until I noticed I'm getting way too slow download speed. The reason I chose this rooter was 150...

Well The best way go get a new one... They are chep now cant by a DLINK Ultra Fast data transfer for $69.99 they are good but if your want 8 to 10 HUB well it will be $160.. not bad

Sep 30, 2010 | Trendnet Wireless Home Router TEW651BR

2 Answers

My husband bought a dlink router (it says dgl-4500 on it) and i cant figure out how to use it to get wireless internet for my new laptop....i have three "codes" he wrote down- a "router pass", a "network...

Router password is the password to access the router settings.
SSID is the network name. When you try to connect to the wireless network on your laptop, you will see this network name.
If your network is secured network then it will ask you for the network key or the password. You need to enter the ' security key '.

Click Here for step by step by instructions

Sep 11, 2010 | D-Link DGL-4500 Wireless Router

1 Answer

The disk will not work need install guide software download for Mod# N4PROUTER please

Are you trying to set up the router. You can do it manually without the CD. Make sure that your computer is able to go online through the modem. If your computer is not able to go online through the modem then you will need to call ISP first. If your computer is able to go online through the modem then you need to connect the computer to the router and the modem to the router. open the set up page of the router and change the settings of the router according to the ISP.

Apr 05, 2010 | NexxTech 4-Port Ethernet Broadband Router...

1 Answer

Actiontec GT704WG doesnt connect to internet

HI! all your computer is connected except for one, you are connected to to the local network but cant get an internet connection, I dont see any problem with your wireless connection bcoz you are connected to the lan, check the security settings of your browser on your windows vista, go to internet option and security, lower it down to medium security, so that you can access the internet or try using other browser like firefox or google chrome.. check your firewall settings as well on your windows vista..

Aug 08, 2009 | Actiontec GT704WG Wireless Router...

2 Answers

Cant connect to internet

Hi Keshavm,

Reset the router using the reset hole on the back panel of the router for 10 seconds.

Do not use the CD for installation. Instead follow the steps below:

1. Connect the modem to the internet port of the router. Connect the computer to the one of the 4 lan ports of the router.
2. Access the router using or
3. Login using username of admin and password as password.
4. Click on basic settings in the left hand side menu.
5. Under router mac address select use computer mac address and click apply.

This should do the trick. If not then turn off the modem and the router and then turn them back on. you should be online by now.

If not then call me at 9891323541 (Delhi, during working hours) and I will be glad to help u.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jul 10, 2009 | NetGear RangeMax NEXT WNR834B Wireless...

1 Answer

Wireless router

First make sure wireless is turned ON or enabled on the computer, then use the View Available Networks to connect to the your SSID or network name. IF you can connect to router then you should be able to surf Internet.

Jun 26, 2008 | NetGear WGR614/WG511 (wgr614nawg511nakit)...

1 Answer

Setting up Netgeat router.


i might have picked a factory defect one router..coz a router dont need any setup when u use it..let the store where u bought that replece it..

Mar 02, 2008 | NetGear WGT624 Wireless Router

1 Answer

My N4PROUTER isnt working :(

isolate your problem. maybe it has something to do with your computer. try connection your pc directly to your modem. if it gets online there. the problem is with your router. try unplugging and replugging your router then restart your pc.

Jan 24, 2008 | NexxTech 4-Port Ethernet Broadband Router...

1 Answer

Wireleess router wont work PLEASE HELP!!!!!

You will need to logon the router via the computer, and create a PPPOE internet connection. The user manual that came with the router will show you how to do this. If you do not have the manual. Do the following: open internet explorer in the address window type the IP of the router "example" your router IP should be on the bottom of the router. If not click start/run, type ipconfig at the > the router ip is listed at "default gateway". once you get to the routers logon page enter one of the following: username "leave blank" - username " admin " -or- username "admin" - password 1234. once logged on the router go to internet connections and select PPPOE enter the username and password provided by your ISP save the settings and you should make the internet connection now. BPCS

Dec 30, 2007 | D-Link DI-634M Wireless Router (DI634M)

1 Answer

My wireless router wont work

Run a cat5 cable from the laptop to a cat5 port on the router, open internet explorer in the address window type or what ever the IP address of the router once you have accessed the router create your PPPOE internet connection, enter your Internet Service Provider's username and password. Once you have done this, disconnect the cat5 cable and connect wirelessly to the router from the laptop. If all this fails press and hold the reset button on the back of the router for 10-15 seconds this will reset the router to factory defaults. connect to the wireless router and create the PPPOE connection. BPCS

Dec 29, 2007 | D-Link DI-634M Wireless Router (DI634M)

Not finding what you are looking for?
NexxTech 4-Port Ethernet Broadband Router (N4PROUTER) Logo

Related Topics:

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top NexxTech Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a NexxTech Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides