Question about Linksys Wireless-G Broadband Router

1 Answer

Start up wireless linksystem

I have the router but not the start up disc . is there a place that i can download onto a disc?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 94 Answers
Re: start up wireless linksystem

I believe that once you make the connections to your modem, you should be able to log into the router to set it up by opening a web browser and putting "" or "" (without the quotes) into the address line. The default username and password is usually "admin" and "admin" or username "admin" with no password. From there you should be able to configure the router as needed.

In order to do this, you either need to be able to pick up the wireless signal (and have the WEP or WPA key if it's already secured), or connect your computer to the router via Ethernet cable and then take the steps above.

Lastly, once you're in, check the router's manual (if you have it), to see what the recommended settings are. The nice thing is that routers make connecting to the internet easier for you: then work with the modem to figure out the IP addresses for your networked computers, as opposed to having to go into your TCP/IP settings on your computer and having to mess around there.

Let us know if you have any success.

Posted on Jan 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Log in to linksystem

In Internet Explorer or your browser of choice type the following in the address bar: or (depending on router setup)

You should see a log in option. Check your manual for the default username and password.

Mar 02, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

I have a linksystem WRT54G2 ROUTER I can not get it to hook up to Xbox live. The problem in between the network and the internet. It says I have a dns issue please help

Are trying to connect to the wireless network on the X-box ?
First you will need to check the wireless settings of the router.
Is there any computer connected to the router ?
If yes then open the router set up page on that computer and check the wireless settings of the router.
Make sure that the wireless MAC filter is disabled on the network.
Also you will need to reduce the MTU settings on the router.
You will need to open some port numbers on the router.
Disable all the firewalls on the router.

Click Here for more information about routers and networking

Feb 10, 2010 | Routers

1 Answer

Need to add another laptop computer to my wireless router at home

Try (admin) for your password and see if that works for you. Good luck.

Feb 18, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless connection to lap top

try opening network connections disable the default connection and enable linksystems

Jul 13, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Password settings

open up you Linksys user inaterface click on the wireless tab then security then go to the field called WPA SHARED KEY
then type your password to secure you wireless connection. Dont forget to save the settings.
Best of Luck.

Jul 01, 2008 | Dynamode RADSLC4WG Wireless Router...

1 Answer

Two Questions Connecting with Belkin Wireless Router...

To answer the first question, please provide what kind of operating system you are using, and please provide the exact error message. Its probably just a caution/nag that you don't really have to worry about, but if you provide more information then so can we.
For the second question, you will need to setup the WEP on the laptop to get the laptop to connect to the router via wireless, regardless if it was used to setup the router, the wireless network is encrypted so it will need to be accessed by a computer(s) that have the key programmed into them. You can plug in the laptop into the hardwire Ethernet port for configuration, that is another option.

May 14, 2008 | Belkin (F5D7231-4) Wireless Router

2 Answers

Password settings

if you are talking about wireless security, you will find the settings under Wireless Security in the routers setup page.  The default will be HTTP://  no username, default password of "admin"  If you are talking about the router's password itself, you will find that under Administration in the same setup page.

Oct 19, 2007 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides