Question about Video Cameras
Message also says "Unit in safeguard mode" Cannot get cassette to eject.
SOURCE: E01-E06 Unit in safeguard mode
I had this same problem, and indeed it was from leaving a tape in the camcorder while in storage. All I did was remove the tape and put a new one it. Solved my problem! Thank you!
Posted on Oct 16, 2008
There should be an error code star with E-01 to E-06.Below is an example you have to make sure that which error code showing on your camera
Whenever some abnormal signal is input to the syscon CPU,
an error number (E01, as an example) is displayed on the
LCD monitor or (in the electronic view finder).
In every error status, such the message as shown below
1. The mechanism is locked during mode shift.
2. The mechanism is locked at the mechanism loading
end, because the encoder position is skipped during
mechanism mode shift.
3. No power is supplied to the loading MDA
Posted on Sep 28, 2009
Poor contact of drum motor connection(flexi found at the upper part of the drum assy). Solution, disconnect this wire from the connector and cut 1mm from the end so that it will make a new contact. WIre will be shortened a little bit but it still can work this way since this flexi can not be ordered alone, it comes complete with the whole drum assy. Good Luck
Posted on Mar 16, 2010
Tips for a great answer:
Sep 04, 2015 | JVC Video Cameras
Sep 25, 2009 | JVC Video Cameras
Apr 17, 2009 | JVC Cybercam GR-DV500US Mini DV Digital...
Aug 26, 2008 | JVC GR-D250 Mini DV Digital Camcorder
Feb 21, 2008 | JVC Cybercam GR-DVL920 Mini DV Digital...
Dec 22, 2007 | JVC GR-SXM265 S-VHS-C Analog Camcorder
Oct 18, 2007 | JVC Cybercam GR-DVM90 Mini DV Digital...
Oct 17, 2007 | JVC GR-DVF21 Mini DV Digital Camcorder
244 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: