Question about Panasonic GigaRange KX-TG5432 Cordless Phone

Open Question

No link to base error message...

On Panasonic KX-TGA560CM. But I can't seem to find the manual online. I have a similar phone KX-TG5432, can I follow the insturctions on p 41-42 to reboot the handsets and relink them to the bases?

Posted by on

6 Suggested Answers

  • 944 Answers

SOURCE: Hard reset of KX-TCD580 Base

Go to this link; and input "KXTCD580" in the search box - after a few disclaimer screens you get to the manual for your phone. page 29 details reset for the handset Page 32 details base unit reset Page 48/49 details cancelling handsets to the base Hope this helps, please post again if you are still having problems with your phone :)

Posted on Apr 01, 2007

  • 306 Answers

SOURCE: no link to base Panasonic KX-TG2357

are you running a wireless router? try unpluging router to test phone.

Posted on Jan 07, 2008

  • 1 Answer

SOURCE: Panasonic KX-TG2740 Cordless Phone - Can I reset handset registration

press function button on handset, scroll to initial setting, select by pressing right arrow, scroll to registration, select, select hs registration, follow directions on handset display, pressing mute on "new" base station, and ok on handset(plugged in). If you like, you can unregister with the "old" base unit first.

Posted on Jan 16, 2008

  • 15 Answers

SOURCE: kx-tg1100

On your handset go to "SETTINGS HS" -> "REGISTRATION" -> "CANCEL BS"
This will discard the registration of the handset to any base.

Then go to "SETTINGS HS" -> "REGISTRATION" -> "REGISTER HS"and select the base you want (i.e. BASE 1, BASE 2, ..., BASE n).

After you finish all the above, hold down the "PAGE" button for about 5 secs.

You are now done!!!

Good luck

Posted on Nov 23, 2008

  • 1 Answer

SOURCE: Own model KX-TG6031CM. Handset display is lit up

need access code to retrieve messages for kx-tg6031cm panasonic phone

Posted on Feb 20, 2010

  • 4723 Answers

SOURCE: I want the user's manual

The handset manual is here: (you'll need to rate the product or enter security code to download).

I hope this helps.

Cindy Wells

Posted on Jul 28, 2010

Testimonial: "It really was useful, as now I can set the settings on my phone and get the ful out of my phone."

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Display not showing on 3 0f the 4 phones model PANASONIC KX-TGA560B

Display not showing on one hand set phones Model Panasonic KT-TGA560CM

Jul 27, 2011 | Panasonic KX-TGA560B 5.8 GHz Cordless...

2 Answers

I cannot use the cordless part of my panasonic KX-TC1221BXB. The following message is shown ''No link to base. Place on cradle and try again'' But even after placing back on the cradle, the same message is...

I couldn't find the exact manual for your phone but I would try to re-register the phone. Following are some instructions for similar models of your phone.

*To do this on a non-expandable cordless phone:
  • Press and hold the LOCATOR/INTERCOM button on the Base until a beep sounds.
  • Press and hold the FLASH/CALL WAIT button on the Handset until a beep is heard.
  • When registration is complete, a beep sounds from the handset.
  • Wait for 20 seconds after registration is complete to allow the handset to establish communications with the base.
If this fails to help: Remove the AC Adapter from the phone base or wall outlet for a few seconds and reconnect. It may also be necessary to remove the battery from the handset for a brief moment.

Good luck!

Mar 06, 2010 | Phones

1 Answer

No link to base

It sounds like you may be getting interferance from somewhere. Try moving the base unit to another location. Avoid putting by other electronics. T.V.s, microwaves, and such can mess with the signals. Hope this helps Good Luck!

Jul 24, 2009 | Panasonic GigaRange KX-TG5432 Cordless...

1 Answer

How to use call waiting

The flash button is the black button to the left of the Menu button, when you are on a call, or the talk button has been pushed to use the handset. It doesn't show when the phone is in standby, but when it is on, it should say Flash in the LCD screen and have an arrow pointing to the button.

Apr 25, 2009 | Panasonic GigaRange KX-TG5432 Cordless...

1 Answer

Remote access

I have a very similar Panasonic phone, but I don't use the remote feature. In the past I had a similiar phone where I just dialed the phone number and entered a three digit code that I assigned and was able to listen to the messages. Here is a link to the owner's manual. Look on page 29-30.

Oct 02, 2008 | Panasonic KX-TG1033S Cordless Phone

2 Answers

No link to base move closer to base

Your getting this message because the radio portion of the handset or/and base is not communicating with each other. This can be temporary or fatal. You can try re-registering the handset(s) to the base by following the directions in the manual, its fairly easy to do for any model. If that does not work,and you have more than one handset not working with this problem, then it sounds as if your base needs repair or replacing.

Feb 04, 2008 | Panasonic KX-TG5632M Twin Cordless Phone

1 Answer

Panasonic cordless KX-tg5432

Message on phone is "get closer to base

Jan 03, 2008 | Panasonic GigaRange KX-TG2432 Cordless...

Not finding what you are looking for?
Panasonic GigaRange KX-TG5432 Cordless Phone Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts


Level 3 Expert

94267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides