Bootloader USB INIT

Sounds unrecoverable. The phone needs to be reflashed. Have you contacted AT&T?

Your phone is partly fried. It needs to be re-flashed. You can do it with a USB cable and the proper software....Google "bootloader USB" for some help in finding the software. One thing to try, hold down the "*" and "#" keys while powering up the phone, this could possibly help, but I doubt it.

Good Luck!!!

you can go to www.android.com and find out mre info and downloads for free for you new motorola cliq

go to service center. need to be reprogram. tnx

you used a regular usb cored. i had the same problem you have to send ut in to get a new one its broken you need a dat cord hope i helped

Get this Phone reflashed. Of course if you Dropped the Phone or if it went into water then Forget it about spending 35-50 Bucks on reflasing this phone. because it will go back to Boot Mode.

basicly the software is corrept.take it 2 a cell 4ne repair shop they will fix it it cost about 150.u cnt do it on ur own coz it takes a specail soft ware n only certain ppl have it

the phone need to be reflash so take it to a mobile center to have it done or mobile technician.

what you all need to do is have the firmware reflash on the phone....take it to a professional mobile tech or mobile service center

Same thing today. Can't get it to turn on, charge or anything. I was warned not to get this phone by Alltel, that there was major problems with it, they even showed me a memo sent around to all dealers. That due to all the problems with the phone that it would be cheaper to replace/try to repair...then recall. I heard that newer versions of this phone are better, minw has been ok until now...mfg.date 2/07...