Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

Video Won't Save

I'm trying to edit some videos I took with my Camera, but when I hit save an error message comes up saying it can't save due to lack of memory. The video is only about 3 min long, is that too long?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 35 Answers
Re: Video Won't Save


The issue you have posted regarding that you are getting an error message that you cannot save the video because of not enough memory could be related to not enough drive space, I would appreciate if you could perform few steps below to isolate and fix the issue.

  1. Click on start point to My Computer and click on it.
  2. Once the My Compute page is displayed, right click on drive C and left click on properties.
3. Check if there is enough disk space available, if YES then follow the steps below or if NO then try to delete few waste or unused files to crate disk space, and try saving the video file that you were trying earlier.
  1. If you find that there is enough disk space then, try to save the file on the hard drive by selecting a different location, it could be that your are trying to save the file in a location which does not have enough memory or it could be right protected for example a CD.
In order to save the file on to a different location all you need to do is, Click on “File” and click on “Save As” option then in the box which pops up on your screen you need to look for a “Save In” option at the top and change it to “C:” or “Local Drive” and then click on “Save” at the bottom.

Should you require any further assistance regarding your computer related to this or any other issue in future please contact me I will be more than glad to assist you.


Malik Khan

Posted on Jan 31, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The printer shows the error message "Turn power off and then on" but it does not get off swicted off and it continues to blick the same error message,how do I fix it?

Sounds like a lack of communication from your printer to your print port.
Try this... left click your task bar in lower bottom right corner. if you see a small icon that looks like a printer open it. Then left click it and select discontinue/cancel print job. With the printer still on restart your computer,( save all work before you do the reboot.)
This should bring your printer back up to communicating with your computer.
Hope you good luck.

Jul 03, 2015 | Printers & Copiers

1 Answer

Iconvert scanner won't save my scanned document to my ipad - says image not saved

change the format of the document to something the ipad can id (format: jpg, jpeg, an so on

Jan 26, 2013 | Printers & Copiers

1 Answer

Can not scan pictures- says operation could not be completed (error0x00000015) the device is not ready


Your product released before Windows XP, Windows Vista, or Windows 7, and HP has not released drivers that support scanning for your product.
You have not installed the available HP software that includes scanning.
You are troubleshooting a scanning problem and need a quick workaround until you resolve your issue.

Windows XP
Follow these steps for the Windows XP operating system.
Scanning with Paint
To scan a document using Paint in Windows XP, follow these steps:
NOTE: Before you begin, make sure that the product is connected to your computer.

Click Start , point to All Programs , point to Accessories , and then click Paint .
Click File , and then click From Scanner or Camera .
Make any desired setting changes.
Click Scan .

Video of scanning with Paint
The following video demonstrates how to scan with Paint.
If you have trouble viewing the video or to view the video in a different size, click here to play the video on YouTube .
Features available with WIA drivers
The following scan options and file types are available when you scan with WIA drivers:
Scan Options
Color picture
Grayscale picture
Black and white picture
Black and white text
Custom Settings

Contrast or Brightness adjustment
Resolution (75 - 4800 dpi, within the limits of the scanner model)
Picture type (Color, Grayscale, Black and White)

Supported file types
.bmp - Bitmap Image File
.jpg - JPG Image File
.tif - Tagged Image File
.png - Portable Network Graphics File
.pcx - Paintbrush Bitmap Image File
Experiencing Scanning Errors?
If you experience an error during scanning, try these general scan troubleshooting steps (c02114802) (in English).
Perform the following steps if you are unable to scan directly from HP Solution Center in Windows XP.

Click Start , and then click My Computer .
Double-click Local Disc (C:) .
Double-click Program Files .
Double-click HP .
Double-click Digital Imaging .
Double-click Bin .
Locate and double-click one of the following files. You will only have one to choose from.
This will launch the HP Scan application.
Select New Scan , and then change any desired settings to the scan.
Click Accept to save the scan to the desired location.
Follow these steps if you need to save the scan as another file type, such as a .PDF:
Right-click the recently saved file to open it in another application, such as Microsoft Word.
Save the new scan as the desired file type.

Jul 21, 2011 | HP Photosmart C4150 All-In-One InkJet...

1 Answer

U051 error message. Won't print

Well, you must be using PG30, CL31 cartridge for your printer.

Did you refill your cartridge?
For error 051 means printer is not reading the cartridge. (cartridge is not readable)
When you put refilled cartridge, that's what it happens.
(after 3~4 times of color refill, color cartridge is no long to use, only applies in Canon
and there is no solution for it.)

Pls replace with new one.. and will work again.

Or if you need to refill again with other cartridge, pls....unplug your printer before you taking out the cartridge. In this way, you can re use your cartridge. Little trick... but no solution will work, once cartridge is not readable.

If you would like to save money, try refill kit by "ROADINK".
Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.

May 11, 2011 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Error code e 2

It means no paper...

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 ? Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error ? USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error1

If you would like to save money, try refill kit by "ROADINK".
Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.

Apr 25, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have a PIXMA MP 110 CANON and when i go to print it says CARTRIDGE IS JAMMED PRESS OK. The computer says it is a ERROR 5100 problem and press OK AND IT SHOULD WORK .but it doesn,t. The cartridges are...

You are facing e5 error which cannot be solved.

For Canon printer, if you refill about 4~5 times, especially color, the printer does not read that particular cartridge.

Well for solution? You need to replace the cartridge with new one.
Just blame Canon....

If you would like to save money, try refill kit by "ROADINK".
At least you can easily save $100 for color cartridge (facing e5 error after 4~5 times of refill)

Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.

Apr 19, 2011 | Printers & Copiers

1 Answer

Error 8,[ (4,0 -2147023170) ]

Cabgal .... what are you talking about? What you said makes no sense.

Explain yourself better or don't post!

The error is due to lack of memory needed to save/process the scanned pages. If you are scanning a full size book ... try limiting your scan to no more than 100 pages. Before you attempt to scan again ... power cycle the HP printer/scanner. Then run %temp% and purge all of the files listed.

Dec 06, 2009 | HP Officejet Pro 8500 Wireless All-In-One...

5 Answers

'unable to save file. the system cannot find the path specified'

Had this same problem and just fixed it. You need to actually change the button settings in Navigator. Open MP navigator and choose One-Click, then click Button Settings. You can choose a new save destination from here. Even though you are using the software instead of the button on the device, it works.

Dec 04, 2008 | Canon PIXMA MP830 All-In-One InkJet...

2 Answers

Easyshere 5300

The error message appears due to a faulty dot net framework installation on the system.

Perform the below mentioned steps in order to fix the issue.

· Uninstall the Dot Net Framework 2.0 from the system from the add/remove programs section in add/remove programs if the OS is XP.
· Else you can also download the Aaron-Stebner's .Net Framework Setup Cleanup Utility from the website: -with-aaron-stebner-cleanup-tool/
· On this website, guide the customer click on the Hyperlink [Download .Net Framework Setup Cleanup Utility]
· Save the utility and run it. When given the list of options, choose Dot net framework 2.0.
·Follow the prompts to uninstall the .Net framework 2.0
·Restart the system.
·Download the .Net framework 2.0 from the website:
· When prompted, save the file and then run it. [Don’t try to run the file without saving it; else you would get an error message
Error 0X80131107
Error Code 25015.
·After the installation of the .Net framework 2.0, check the AIO Home Center again.

Best of Luck

Jul 30, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

RX500 won't copy

what operating system are you using and what is the specific error message when you attempt to uninstall the driver?

Apr 01, 2008 | Epson Stylus RX500 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

94198 Answers

old marine
old marine

Level 3 Expert

1317 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides