Question about Zenith Z27A11G 27" TV

1 Answer

Zenith h25w35dt channe are locked i cant scan for channels i ought it from a walmart that was closing it ws one they used it is locked i only get one chanel and the tv turns on whn it s plugged in

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers
Re: zenith h25w35dt

You need to go into the service menu and turn the ac power setting to off and read to see if you can get the channel to scan To enter service menu: hold down menu on remote until menu disapperar then type in 9-8-7-6 then enter. Continue as described

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Emerson EWF2006 TV access code

if your tv doesnt have a digital tuner, you cant, unless you have a digital to analog tuner converter (can be purchased in walmart, or other stores that carry tv s, electronics) you tune your tv to 3 or 4, use the converter box to scan for channels, and for changing channels instead of your tv tuner

Mar 21, 2013 | Emerson EWF2004 20" TV

1 Answer

Zenith dtt901 not getting signal, no RF output to tv

either the tuner is dead or something in the box menu is set to composite out only.

Might be the reason it was given away?

Mar 13, 2012 | Standard (CRT) Televisions

1 Answer

Cant change channels or input using front panel/no remote

Buy a new remote,tries this website for an exact remote or very closse to the original.1-800-Factory Original.

Sep 30, 2009 | Emerson CR202EM9 TV

2 Answers

Zenith h25w35dt cant unlock auto program


Apr 08, 2009 | Standard (CRT) Televisions

1 Answer

I would like to change the start up channel setting.

if you are using satellite or something that use channel 3 and there are no other channels(cable) do a channel scan from the menu of your tv.if you have an antenna or cable hooked up temporarily unhook it so when you do the scan all it finds is what you have on channel scan may also be called autoprogram depending on your tv

Nov 14, 2008 | Zenith Standard (CRT) Televisions

1 Answer


Sometimes TVs get reset after a power failure in which case it may default back to the setting it was prior to the initial purchase.When this occurs some, all, or noneof the channels may be locked. Go to the tv menu and run a channel scan this should find all the channels you want however you need to ensure you are scanning the proper source such as cable for cable or antenna for an aerial outdoor antenna. If you have satellitte you may need to power the STB off using the button on the STB itself. If that fails it may be a line of sight issue such as dish being moved by external forces e.g. windor kids.
Hope this helps you.

Sep 07, 2008 | Zenith B27A11Z 27" TV

2 Answers

H25W35DT Zenith Tv locked

can you open set ups or main menu using your universal remote? if yes try to find presets, or auto program. if no, then you really have to secure the oiginal remote.

May 31, 2008 | JVC AV-20220 TV

3 Answers

Zenith Concierge H25W35DT 27"

The CORRECT answer is you must purchase a LP702 remote. Google it to find one to buy. You must unlock channels and program the channels fresh.
Some standard zenith remotes allow you to reset the tv by popping off the cover of the remote and pressing an unmarked button.

Mar 09, 2008 | Zenith C27A24T 27" TV

2 Answers

Zenith h32h38dt 32

The "H" model Zenith TVs are hotel/motel sets designed that
a roomer cannot access the menu feature. Your best bet would
be to purchase a name brand universal remote which has the
menu button feature or order an original Zenith master remote
which would not require programming. Once you have a workable
remote which will allow you to access the on-screen menus you
should be able to program the channels.
Hope this helps,

Feb 27, 2008 | Standard (CRT) Televisions

1 Answer

Zenith tv

well 2 things come to mind, 1st go into menu and run channel scan, see if that brings them back

2nd if you see a black square on the screen of these channels turn off the closed caption, again in the menu

and if all else fails hook up cable or sat box from the video out to the video in on the tv, set the tv to video input viva remote or going to channel 00

hope this is of some help

Feb 06, 2008 | Zenith B27A11Z 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66516 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Anastasio Benjou

Level 2 Expert

99 Answers

Are you a Zenith Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides