My max memory card will not work in slot one

The IXY 70 works with MMC and SD cards, which max out at 2GB. While larger-capacity SDHC cards will fit into the slot, they will not work in the camera.

Memory Cards


The MP610 can read from SD Memory, SDHC, MultiMediaCard, miniSD, RS-MMC, microSD, CompactFlash and Microdrive, Memory Stick, Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo and xD-Picture cards.

Cards will the slots will appear as removable drives on your computer.

You can upgrade it to 2GB (MAX) if Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)
Maximum Memory: 2GB
Slots: 2
Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.

Hope this helps.

Hi this model sopport 2Gig Memory Ram.


RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM
Installed RAM 512 MB
Max Supported RAM 2 GB
Number of Memory Slots 2 x DIMMs
Supported RAM Speeds 400 MHz • 333 MHz
Installed Cache Memory 256 KB

Please check in to your Bios system maybe share memory Video or capacity is setting

This camera can hold up to 2 GIG of memory card that you can use for it.

Hey Richard, your board has 2 x 184 DIMM slots, that are both usable, with a maximum capacity of 2GB, supported RAM types are 333MHz, and 266MHz..

Hope this is what you are looking for,

Cheers,


Memory Type DDR SDRAM Number of Memory Slots 2 x 184 Pin DIMMs Supported RAM speeds 333 MHz • 266 MHz Max Supported RAM 2 GB Memory Type DDR SDRAM Number of Memory Slots 2 x 184 Pin DIMMs Supported RAM speeds 333 MHz • 266 MHz Max Supported RAM 2 GB DDR SDRAM Number of Memory Slots 2 x 184 Pin DIMMs Supported RAM speeds 333 MHz • 266 MHz Max Supported RAM 2 GB

try to place the 64mb memory on the first slot...
some games only access first slot,...

Seems the memory is not comatable with the motherboard. Replace the old memory and visit http://www.crucial.com, they have a scanner tool which will confirm what mem can be installed.

Looks like your motherboard is a MSI KM4AM-L detailed here:

http://www.msicomputer.co.uk/index.php?func=proddesc&prod_no=572&maincat_no=1

If so, then it has an AGP slot which will run at 4x and 8x.

Remember to check the BIOS settings after you install it to make sure it is set to 8x, if that is what your card will take.

Greetings,

The motherboard will read 1GB DDR400 memory per slot only.

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.