Question about Toshiba Magnia SG20 Web Server

1 Answer

Computer no longer recognizes server

Does not dispay programs associated with the server.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: computer no longer recognizes server

Assuming this problem is for ANY computer, not just the one.
If you still have internet access through the device, but cannot see network shares, your Samba server is down. If a full restart does not solve the problem, you need to learn Samba/Linux -or- you need to re-image the drive to factory defaults.


Posted on May 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Issue with time synchronizing(NTP) on layer 2 switch

I know this is probably not going to help you out but you did try going to Alcatel-Lucents web page and search through there or calling them at 800 995-2696? Good Luck! Sorry I couldn't be of some help

Mar 04, 2014 | Alcatel OmniSwitch 6850 (OS6850-48)

1 Answer

My swivel Hub is no longer being recognized on my computer.

The swivel connection sometimes fails to contact.
Does the pivot wobble, or seem loose?
If the device is still in the warranty period, return it to the manufacturer.
Call their support number to get a return order and instructions on their procedures.

Aug 01, 2011 | Belkin Swivel Hub 4-Port

1 Answer

How to Assign an IP address in Nortel 1648T switches

Add a computer to your network, and install Microsoft Windows Server on that computer, and enable its "DHCP-server" component. Then, this computer will supply IP-addresses for all the other computers connected to your switch.

The switch is _NOT_ a DHCP-server; therefore, you need to add a DHCP-server.

Dec 10, 2010 | NorStar Nortel PASSPORT 1648T ROUTING...

2 Answers

I am trying to install a Netgear router after my switch. I end up having no internet on some of the computers connected to the hub and none on the router. If I configure the router as a dhcp client...

You'll want to configure your router as a dhcp server. Connect the switch to your router's lan port. Connect the remaining devices to a port on the switch. Your wireless access point should have it's dhcp server disabled. You can only have one dhcp server per network. The wireless can get it's address from the router's dhcp and the wireless client devices will get their ip address from the router, as well. If your wireless access point is a router with a wan/broadband port and some switch ports you will want to make sure that you are connecting to your Asus switch via one of the switch ports.
Be sure that your client devices are configured to get their ip address via dhcp and you should be surfing the interweb in no time flat.

Oct 21, 2010 | ASUS GX1008B 10100Mbps Desktop Unmanaged...

1 Answer

How to find and enter the server name/connect a server to outlook express .I have got a server and many client systems connected to it,and outlook express is already installed,but i dont know how to bring...

Contact your local ISP (Internet Service Provider).
They will tell you the name of the mail-server(s),
and will tell you how to configure Outlook Express to use the name(s).

Almost any "Pentium 4" (or newer) computer is "beefy" enough hardware to run Microsoft Exchange as an Intranet Mail Server. So, $100 to $200 for a "bare" Pentium 4 system, plus the cost of purchasing a license for Microsoft Exchange. Hiring a consultant to do the setup/configuration will run $100/hour.

Mar 03, 2010 | Network Computing Devices (NSH800S/A)...

1 Answer

Slow lan (file transfert) with zyxel ES116P and HP ML150 server

Try forcing the ports that the server connects to on the switch to 100Mb Full duplex, sometimes one side negotiates incorrectly, and the switch can set itself to half duplex, even though the other end is set to full duplex.

Feb 17, 2009 | Networking Hubs & Switches

1 Answer

ESHUSB-4P hub problem

Your hub ma have been a older version of USB and the new computer has the USB ver2. in this case the hub is not talking to the computer. the computer USB is not backward compatible and will to detect the hub. you will need a new hub.

Aug 20, 2008 | Encore ENU-4USB 4-Port External Mini USB...

1 Answer

No longer pinging...

check the cables, it's possible that a wire used for the comm. from the server to the switch/router is not making proper contact or is broke...

Jun 24, 2008 | NetGear 24-Port (fsm726s&mr814) Networking...

1 Answer

Two computers one printer

try to share your printer on th computer were you dirctly installed the printer. and on the other printer run add printer program and look for the installed printer

Feb 28, 2008 | Belkin BLKF5U201 USB Peripheral...

2 Answers

Technical problem

Is there a server involved and what os are you running on all the machines, If all machine are equal, you might want to replace the Network card

Jan 17, 2008 | Networking Hubs & Switches

Not finding what you are looking for?
Toshiba Magnia SG20 Web Server Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Networking Hubs & Switches Experts


Level 3 Expert

4327 Answers


Level 3 Expert

18257 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Toshiba Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides