Question about Samsung CLP 300 Laser Printer

1 Answer

No photo paper showing in "TYPE OF PAPER

I don't see any setting for photo paper so what paper setting do I use for photo paper ? Also I can't figure out how to remove tray to set for 4x6 photos.

Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 74 Answers
Re: no photo paper showing in "TYPE OF PAPER

I would recommend using the thick paper settings, also just pull on the front of the tray and then you need to remove the paper in there and then adjust the guides to fit the paper, also if you are using A4/Ltr/lgl then you will also need to collapse the back section by pushing down on buttons and then pushing on the back to shorten the unit

Also remember that this printer was not designed for photo printing, also make sure to place the paper face up(the side you want to print on)

Best of luck,

P.S. don't forget to Rate me!

Posted on Feb 19, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

HP Photosmart 3210 service & repair manual sought

There is NO technical information available for any HP inkjet models, not for anybody, even service centers.. HP offers exchange only.

Apr 02, 2014 | HP Photosmart 3210 All-in-One Printer...

1 Answer

How to change from photo to plain paper on settings on Epson SX445W

This question has not been answered. Has anyone figured out how to change the 'Paper Type" setting in the copy menu from photo paper to normal paper? Also how do I change the quality setting from "standard quality" to draft etc.

Jun 28, 2012 | Printers & Copiers

1 Answer


Follow these steps to change print settings, and then print in Mac OS X 10.6. Step one: Select your product
  1. In the program from which you want to print, click File , and then click Print . Figure 11: Click File, and then click Printc02458420.jpg
  2. Select your product from the Printer: drop-down list.
Step two: Change print settings
  1. Type the number of copies to print in the Copies text box.
  2. If you want to print multiple copies, select the Collated check box to print the pages of each copy in order.
  3. Select the pages of the print job that you want to print. To print all pages, select All. To print a specific range of pages only, type the page number that begins the page range in the From text box. Then, type the page number that ends the page range in the To text box.
  4. Select the size and type of paper loaded in the product from the Paper Size drop-down list.
  5. Select the orientation for your print job. To print in portrait orientation, click the icon on the left. To print in landscape orientation, click the icon on the right.
Step three: Change the paper type and quality settings
  1. After the Orientation section, click the drop-down, and then select Paper Type/Quality . NOTE: This drop-down usually defaults to the program specific drop-down. In this example, the drop-down is the TextEdit drop-down. Figure 12: Select Paper Type/Qualityc02458421.jpg
  2. Adjust the Paper Type setting to match the paper loaded in the product.
  3. Adjust the Quality setting to change the print quality of the printed page.
  4. Select Print Borderless to print photos without a white border.
  5. To change the color profile or to turn on Photo Fix, click the arrow next to Color Options to display the Color Options menu. Figure 13: Color Options menuc02458422.jpg 1 - Paper Type/Quality menu options 2 - Color Options menu (only available if you click Color Options)
Step five: Print the print job After all the settings match the needs of the print job, click Print on the Print window to print the document or print job.

Dec 26, 2010 | HP Photosmart C3150 Printer

1 Answer

I have 4 x6 printer paper and the printer only shows standard 81/2 by 11

If you use windows photo gallery to print, it will allow you to set the paper size and type, otherwise in your control panel/printers and printing preferences you can set the 4x6 paper size.

Oct 02, 2009 | Canon i860 InkJet Photo Printer

1 Answer

When I print on photo paper the ink doesn't dry and picture quality is unrecognisable

You have to match your print settings with the correct type of media used !

When you print, set the preferences, set to PHOTO quality and not draft, set paper type to PHOTO PAPER, or GLOSSY PHOTO PAPER whichever - If you select wrong media type your colors might be off. Select the settings that match the closest to your media. If you use paper use "plain paper" setting, if you use glossy photo paper, use "glossy photo paper" as settings and PHOTO quality.

I recommend use you use inkjet PHOTO paper, glossy, you can use HP or EPSON or even the cheap LIKON ones work amazing for me, they should be able to dry quickly, if they don't you are not using the correct settings.

By your description above it looks like you are using economy or draft mode - NOT good for photo paper.

Sep 26, 2009 | HP Printers & Copiers

1 Answer

Mp460 feeds more than one pages

Hi ...

There is no hardware fault in this perticular situation. This happens because of paper loaded. There are 2 possible resolution to this problem:

I) Fan paper prior to inserting it into the MP460

  1. Remove paper from the ASF.

  2. Open the paper output tray. (See <2> in Figure 1 below.)

  3. Set the paper thickness lever according to the media being used. (See <3> in Figure 1 below.)

    Note: For paper thickness lever settings, use the following setings for the media type being used: Right side: Envelopes / T-Shirt transfers. Left side: All other media types.

    * Figure 1

    The illustration shows the PIXMA MP460

  4. Fan out the sheets of paper so that they do not stick together.


  5. Load paper in the auto sheet feeder with the paper's print side facing up. (See <1> in Figure 2 below.)

  6. Align paper to the right edge of the auto sheet feeder. (See <2> in Figure 2 below.)

  7. Pinch and slide the paper guide to the paper's left side. (See <3> in Figure 2 below.)

    * Figure 2

    The illustration shows the PIXMA MP460
II) Load fewer sheets into the MP460
Don't forget to vote if this helps ... Cheers :)

Jul 17, 2009 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Epson r350 printer does not print thick paper or inkjet paper

Hi, this printer is "clever" in that you don't adjust the thickness setting it does it itself.

It does this based on the paper type you set in the printer properties, see the table below for the different types of paper it will accept & the setting you need to use.

For this paper Select this paper type setting Plain paper, sheets Epson Premium Ink Jet Plain Paper Epson Bright White Ink Jet Paper plain papers Epson Ultra Glossy Photo Paper Epson Ultra Glossy Epson Premium Glossy Photo Paper Epson Premium Glossy Epson Premium Semigloss Photo Paper Epson Premium Semigloss Epson Glossy Photo Paper Epson Glossy Epson Matte Paper - Heavyweight Epson Double-Sided Matte Paper Epson Matte Epson Photo Quality Ink Jet Cards Epson Photo Quality Ink Jet Epson Photo Stickers Epson Photo Stickers Envelopes Envelope
Hope this is of help.


Jun 01, 2009 | Epson STYLUS R350 Photo Printer

1 Answer

I don't know where the "photo tray" is located!

You have to specify the paper type in the printer properties. Look in the printer properties folder and navigate to the paper type or options. You'll find a place where you can specify what kind of paper you have.

Mar 15, 2009 | HP Photosmart 3310 All-In-One InkJet...

2 Answers

Ink Color Issues

Did you change any of the configurations on your printer. Most photo printers have color settings that are media dependent. It sounds like you might have it set to print on regular paper but not on photo paper. There are a lot of settings that you can accidentally change on a printer so I would suggest uninstalling the printer then reinstalling it and see if that is the issue.

Sep 11, 2008 | HP Photosmart 3210 Printer

1 Answer

8250 hp printer

Adjust the paper settings in the print driver. The paper settings in the print driver must match the paper settings for at least one of the installed paper trays.
  1. Open a document in the program in which it was created.
  2. Click File .
  3. Click Print .
  4. Click Properties . The Printer Properties dialog box displays.
  5. Click the Paper/Quality tab.
  6. In the Size is drop-down menu, select the size of the paper loaded in the unit.
  7. In the Type is drop-down menu, select the type of paper loaded in the unit.
  8. Click OK .

hp website

Jan 29, 2008 | HP Photosmart 8250 InkJet Printer

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

166 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides