Question about Altec Lansing MX5021 Computer Speakers

2 Answers

Speakers are not working completly.

The speakers are atttached to the computer correctly. When i talk into the mic. i can hear myself through the speakers, however i cannnot hear anything through the computer. I have tried going to control panel to the audio and sound section and make sure my default for that is my speakers, but still no sound. (i am not sure which Altec Lansing speakers I have, they came with my dell computer)

Posted by on

  • 1 more comment 
  • theraja871 Jan 02, 2008

    the speakers are Ada 745.

  • mimi03 Jan 02, 2008

    My computer has no sound coming out of the speakers. Could I have deleted a file.

  • theraja871 Jan 03, 2008

    cmon wot file

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having a problem with my computer. It says I have a problem with my sound hardware. How do I correct this and why all of a sudden isn't it working.

Posted on Jan 04, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 51 Answers

Please click on start /programs/accessories/entertainment/select volume control/click on the option windows default/thats all your problem will be solved.. thankyou...

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hooked up my CB when I talk on it it I hear myself over my radio speakers.


do you have a talk back modification you don't know about or there was one and someone didn't remove it right or the speaker was wired wrong check your radio ground .or try a diffrent mic.

Jan 09, 2011 | Uniden Radio Communications

1 Answer

Installed Pioneer DEH P6200BT. Experiencing BT problem. Everything seems to work correctly, locating, pairing, receiving calls, dowloading address books, all of that works correctly. The problem I have is...


Hi! I just figured this out myself. The radio only sends the phone call audio to the front speakers. My car only has wires for one set of speakers, so I chose the rear channels. I just rewired to the front channels instead. Solved! Bad on Pioneer, there is absolutely no mention of this in the installation or operation manual.

Dec 07, 2010 | Pioneer Car Audio & Video

2 Answers

I am not able to hear output from my speaker ...


check on line for audio driver downloads for ur motherboard,,

Nov 03, 2010 | Computers & Internet

1 Answer

Who ever i'm talking to cant hear me!


Make sure your webcam mic is set as the default mic
Plug in the webcam

Typical audio set up

Laptop with mic x webcam with mic x Vista x Yahoo Messenger 10
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO YAHOO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Video and Voice

Jul 16, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Hi, the camera works really well, but the audio breaks up to the point where it does not work. I did a complete reload of the software, did the audio test on the Echo - all appeared to be working fine....


Sometimes problems can occur when you have a laptop and a webcam and default is not set within your computer.
TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Jan 24, 2010 | Logitech Quickcam Chat Webcam

1 Answer

Extreme PC Gaming Headset - Echo problem


just buy a new one if symtom persist re install driver

Apr 06, 2009 | Logitech Extreme PC Gaming Headset Behind...

1 Answer

Skype microphone


When you are installing the skype software, there comes a time when skype will offer you the option to test your hardware. Here you will try out the speakers and mic, and skype will tell you if they are in skype accepted order.
My friend actually installed it not too long ago, and after the install, I saw that skype gave him the option to make a test call right on the program interface window. We used it, and it made a call to a skype computer voice which advised us that if we could hear her talking, then our speakers are fine, and to now go ahead and speak into our mic, if the mic is working we will be able to hear what we just said into it.
That was a great little way to make sure our speakers and mic were in fact working, and they were.
Try that out on your pc and your friend's pc to test components individually. If you are unable to find the test call option, or the option to test components, you can uninstall skype and reinstall the latest version, which may not be a bad idea to preclude any other weird problems which may be at fault.
Hope that helps.

Dec 30, 2008 | Acer Creative Sound Blaster AWE64 Sound...

1 Answer

I bought a Logitech webcam and the sound won't come though. It states my input level is not high emough but I can't find it to change it please


My understanding is that a webcam is only a webcam not a webcam+mic (mic=microphone for sound to be input) unless your webcam has video and sound capabilities.

1. get a mic
2. if you webcam is supposed to be also a mic, (I have yet to see one of those myself) you should hook up the connector for the microphone (usually a a red trs plug/connector) to your pc.
3. make sure your have run the video/sound wizard of your instant message application to test your video, mic and speakers. (to see, talk and be heard and hear what the others are saying)

are you trying to hear what the other person is saying when having a video conversation?
1. check your speakers are properly connected, powered and turned on.
2. check your speakers (and mic aswell) are not muted (check your speaker icon on the system tray and check your volume controls by doing right and/or left click on the speaker icon on the system tray.
3. make sure your have run the video/sound wizard of your instant message application to test your video, mic and speakers. (to see, talk and be heard and hear what the others are saying)
4. make sure your sound adapter's drivers are installed and your device is working properly (check device manager by going to start>run> type devmgmt.msc the press enter and make sure that under sounds you don't have any ? (no drivers) or ! driver problem for your sound adapter.

Sep 27, 2008 | Gateway Computers & Internet

1 Answer

Mic doesnt work


have you tried looking in your multiplayer option ins FSX to make sure you have the correct input selected?

Aug 29, 2008 | Logitech Precision PC Gaming Open Air...

1 Answer

Speakers (ADA 745) Not working properly


please reinstall your motherboard cd once again..

Jan 02, 2008 | Altec Lansing MX5021 Computer Speakers

Not finding what you are looking for?
Altec Lansing MX5021 Computer Speakers Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

The Knight
The Knight

Level 3 Expert

75169 Answers

Sharps s

Level 1 Expert

41 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...