Question about Televison & Video

3 Answers

Remote Control Manual

I'm looking for the manual for the Optimus Remote for the VCR. THe number on the back of the remote is VSQS1475

Posted by on

  • Grace A. Barnes Jan 02, 2008

    The Model # of the VCR is 111

×

Ad

3 Answers

I am trying to hook up my vcr to my tv but i dont know what the vcr remote looks like

Posted on Jan 25, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 796 Answers

U can use these links to get rhe manual


www.mcvguam.com/pdf/ER1RemoteUserGuide.pdf
www.oceanic.com/OceanicWebApps/HelpDesk/images/SA.pdf

Posted on Jan 02, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

What is the model number of the VCR? The VCR manual should have all instructions on use of the remote.

Posted on Jan 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I buy this item (remote control for VCR made Panasonic model: NV-P11EE


Curry's Partmaster has a large selection of Panasonic remote controls. However they are not listed under the model numbers of the VCR. Instead they have there own part numbers for example: EUR511244. This remote number might appear on the user manual. If you don't have the manual, the Panasonic website has free PDF's of them.

Jan 16, 2015 | Panasonic Televison & Video

1 Answer

Step by step


What steps are you looking for? Also what is the problem? Also this may solve your issue

Copied from: voxrightnow

Programming the Remote:

Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (See Code List below). These codes enable the remote to communicate with your components. Each brand and each component has its own "language," and, by programming the correct codes into your remote, you tell the remote to "speak the same language" as your components.

There are two methods you can use to program your remote control to operate your components: Direct Code Entry and Manual Code Search and Entry. Most components can be programmed in one of these ways. Try them in the order listed.

In order to control combo TV/VCR or TV/DVD units, you must program both the TV key and the VCR•DVD key. Once programmed successfully, the TV key controls the TV functions on your unit, and the VCR•DVD key controls the VCR or DVD functions. There is a specific section in the Code List for combo units. The codes in this section should be tried first, using Direct Code Entry on the TV and VCR•DVD keys. If this is unsuccessful, follow the normal programming methods for both the TV and the VCR•DVD keys

Direct Code Entry:

To program your universal remote to control your components using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

2. Find the Code List below. Find the list for the component you wish to program. Find your component's brand. You will see a listing of four-digit codes for each brand. If your brand isn't listed, use the Manual Code Search method to program the remote control. (Refer to page 5 in the User Manual for Manual Code Search method, or scroll down in this Answer to the next section.)

3. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The LED indicator light turns on and remains on. If you release the component key any time during the Direct Code Entry procedure, the LED indicator light blinks four times, and the process is exited.

4. While holding down the component key, consult the Code Lists for the four-digit code that corresponds to your component's brand and use the number keys (0-9) on the keypad to enter it. While you are pressing the numbers, the LED indicator light turns off.

5. After the fourth number is entered, the LED indicator light turns on. At this time, release the component key. If the LED indicator light turns off, you have entered a valid code and have followed the correct procedure
for Direct Code Entry. If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the LED indicator light blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 3 and try the next code listed. The last programmed code under that component key is retained. Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control.

6. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your components do not work, try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component's functions. Different codes can provide different levels of functionality.

Manual Code Search and Entry:

If your component's brand isn't listed in the Code Lists, or if you have tried all of the codes for your brand and the remote does not operate your component, try the Manual Code Search. This Code Search method cycles through all of the codes in the Code Lists in the event that your component's code is listed under another brand. The Manual Code Search method may take a long time because the remote searches through all of the codes in its memory for the code that operates your component. Therefore, if your brand is listed in the Code Lists, first try the Direct Code Entry method described on page 4 in the User's Manual also described above.

NOTE: To exit without saving any point in the Manual Code Search, press and release the GO BACK key.

1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

Note: If you press an invalid key during the Manual Code Search, the remote does not respond and the LED indicator light does not blink. If you do not press a valid Manual Code Search key (TV, VCR•DVD, SAT•CBL, ON•OFF, GO BACK), the search times out after two minutes. When the search times out, the LED indicator light blinks four times and turns off. The last programmed code under that component key is retained.

2. If you are programming the remote to control your TV or satellite receiver, go directly to step 3. To program the remote to control a VCR or DVD follow the preprogramming method listed below.

Preprogramming the VCR/DVD Key

The VCR•DVD key can control only one component, either your VCR or your DVD. To program your remote to control either your DVD or your VCR, you must first put the remote in the proper programming mode. Follow these directions before proceeding to step 3.

a. Press and hold the VCR•DVD key. The LED indicator light turns on.

b. While holding down the VCR•DVD key, press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD. The LED indicator light turns off.

c. Release the VCR•DVD key. The LED indicator light blinks four times and then turns off. Your remote is now either in VCR or DVD Programming Mode, depending on which you chose. Proceed to step 3.

3. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The LED indicator light turns on and remains on.

4. While holding the component key down, press and hold the ON•OFF key. The LED indicator light turns off.

5. After holding down both keys for three seconds, the LED indicator light turns back on.

6. Release both keys. The LED indicator light remains on. Throughout the programming of each key, be sure to keep the remote pointed at the
IR sensor of the component you are currently programming the remote to control.

7. Press and release the ON•OFF key repeatedly until your component turns off. Each time you press the ON•OFF key, the LED indicator light blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been searched. If your component
turns off, you have found the correct code. (If it cycles through and the LED indicator light blinks four times and turns off, all codes have been searched. The Manual Code Search method is exited.) Because there are so many codes, you may have to press the ON•OFF key many times-possibly up to 200 times.

8. Once you have found the correct code, you must save the new
code by pressing and releasing the STOP key. The LED indicator
light turns off. You must press the STOP key to save the code or the correct code will not be stored!

9. Once you press the STOP key, the code is stored.

Testing the Code for Maximum Functionality:

1. Once the code has been stored (see Manual Code Search and Entry Method above), use the remote to attempt to control a variety of the component's functions. If the code that has been stored controls the majority of the component's functions, programming is complete. If the
code stored does not give maximum functionality, you will want to try another code.

2. In that case, repeat the Manual Code Search and Entry Method from step 1. When the component turns off for the first time, do not press the STOP key, which would store the code. Instead, with the unit now off, continue to press the ON•OFF key repeatedly until the unit turns back on. Once the unit turns back on, you have found another code that operates the component. Press the STOP key.

3. Test the functionality again by attempting to control a variety of the component's functions. If the code that has been stored controls the majority of the component's functions, programming is complete. If the code stored does not give maximum functionality, you will want to try another code.

4. Repeat the Manual Code Search and Entry Method from step 1. Each time a code turns the component on or off, you have found a code that operates the remote and needs to be tested for maximum functionality. Continue through the code lists, cycling through the codes you have already tried, until you find one that offers maximum functionality.

Nov 10, 2012 | RCA RCR350 Remote Control

1 Answer

My Sony DVD/VCR player Model DVW-7200. I cannot get the remote to work. i can manually use the unit. Now i cannot find the operating manual. Isn't there a process to reset the remote control?


The only instruction manual I can find online for this model is for a SANYO DVW-7200 combo unit. This manual does not illustrate in any detail about remote control 'reset'; only the unit itself using remote to 'initialize' back to factory settings (except parental lock).

If the unit does not respond to the remote control;

Check if the power plug is connected to an AC outlet.

Check the batteries in the remote control.

Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles
between the sensor and the remote control.

You have to be within 23 feet of this unit.

Check if the right mode is selected. If it's not in the right mode, press [DVD] or [VCR],
whichever you need, on the remote control.

Check if a cassette tape is in this unit.

Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up,
then if you hear some signal sound from the radio in response to your pressing buttons on
the remote control, the remote control is working.

(the above tips come from the manual)

You can obtain a free pdf of the user manual for SANYO DVW-7200 (which is the closest to your model) and have a look through it. You can get it from the following:

http://www.retrevo.com/support/Sanyo-DVW-7200-DVD-Players-manual/id/311ag906/t/2/

Follow the prompts (it may ask for an email address), and enter the correct number code to download the document, then save the file. I don't know if it will help you or not, but worth a look.

This model does have a way to turn off progressive scan if it is enabled by accident:

press and hold [PLAY] button on front of unit for 5 - 10 seconds then release. This should revert the unit back to normal interlace (if required).

Apr 13, 2011 | Televison & Video

3 Answers

What is the remote code for this tv Sony KLV-S32lA10


Hello
Programmable code number for DVD/VCR [Sony] is _ 601 (Sony Dream System)
Programmable code for SAT/CABLE is _ 801 (Sony Satellite Receiver)
Above stated both codes are common for [SONY KLV-S19A10 _ KLV-S26A10 - KLV-S23A10 AND KLV-S32A10 compactable]. OK.

Feb 24, 2011 | Sony KLV-S32A10 32 in. HD-Ready LCD...

1 Answer

How to program Akai VCR VS J700 without a remote control ( Lost it) Is this possible? Set the clock and record in advance etc.


I have had a look at the Curry's Partmaster website. The have a lot of Akai Remotes which seem to be priced around £14.99. You could take a look. If you still have the manual it might tell you the model number of the remote. For instance RC81024. The remotes on this site all have numbers like the above all starting with RC. If you find the remote number it will help chase down the correct remote.

Sep 21, 2010 | Akai VS-J700EA VHS VCR

1 Answer

I AM LOOKING FOR A SANYO VCR REMOTE CONTROL AND THE ONLY NUMBERS I HAVE ARE VWM370,I DO NOT HAVE A MANUAL.


look for a universal remote with it should be a programing guide that will give you a list of codes for a sanyo brand vcr enter them per the directions till one works much easier and cheeper than looking for the original

Apr 14, 2009 | Sanyo VWM-900 VHS VCR

1 Answer

I need a remote control for this player/recoder


If you call the phone number on the back of the unit, you can price a remote and manual.

Jul 30, 2008 | Sansui VRDVD4000 DVD Player/VCR

2 Answers

Need manual and remote for ddv3110 serieal 304311000165


hello jim80

here you can a manual User Manual: Go Video Double-Deck VCR User's Guide DDV3110
just going to look for a remote now will post back any find's for you
regards

riz.

May 09, 2008 | Televison & Video

2 Answers

I lost my user manual and the VCR remote control how do i access the menu from the VCR?


http://www.manualsparadise.com Has a wide selection of users manuals

Sep 08, 2007 | Sanyo VWM-900 VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5337 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...